Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X100S
AirTAC B06-SID100X100S Battery-Optimized ISO Cylinder Specifications
- Model: B06-SID100X100S
- Series: ISO 6432 Standard (Battery Application Series)
- Bore size: 100mm
- Stroke: 100mm (customizable up to 500mm)
- Action type: Double-acting
- Operating pressure: 0.05–1.0 MPa
- Cushioning: Adjustable elastic cushion
- Position detection: Built-in magnet for sensor mounting
- Port size: G3/8 (NPT1/4 optional)
- Rod material: Hard chrome-plated steel
- Tube material: Aluminum alloy oxidation-resistant barrel
- Seal type: HNBR seals (high-temperature resistant)
- Temperature range: -20℃ to 120℃
- Protection rating: IP54 (dust/water resistant)
- Mounting options: Front flange, rear clevis, or foot mounting
- Weight: Approximately 1.8kg (without accessories)
- Dimensions (L×W×H): 250mm × 100mm × 100mm (standard stroke)
High-torque ISO cylinder specifically engineered for battery manufacturing environments, featuring enhanced corrosion resistance against acidic vapors and optimized for low-pressure operations common in battery module assembly. Integrated mounting slots allow direct installation of inductive sensors for position feedback.
- Lithium battery cell stacking mechanisms
- Battery pack compression systems
- Automated electrode plate handling
- EV battery module assembly lines
- Battery welding fixture actuation
Installation guidelines:
Lubricate with ISO VG32 hydraulic oil before initial use. Maintain ambient humidity below 85% and install air dryer when operating below dew point. Maximum side load capacity: 50N at full extension.
| Property | Property Value |
|---|---|
| sku | B06-SID100X100S |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.