This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement B06-SAID100X175S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X175S
The AirTAC Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X175S is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø100mm bore and 175mm stroke, G1/2 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the B06-SAID100X175S, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ100 mm
- Stroke175 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → B06-SAID100X175S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X175S
The AirTAC B06-SID100X175S is a double-acting, double-rod ISO 15552 cylinder where a rod exits both ends on one piston, making push and pull force equal at 3681 N @0.5 MPa. The B06- prefix marks this as a battery-manufacturing dedicated variant of the base SID100X175S, mechanically identical for cell and pack assembly lines. This SID model is discontinued; the direct replacement is the SAID100X175S, reusing the same G1/2 port, M20x1.5 thread, and 36mm cushions.
The SAI replacement upgrades the piston seal to two Y-shaped one-way elements for lower start-up pressure and longer life. Because both faces use the rod-side area, the back rod can carry a sensor cam without losing stroke. The -S suffix denotes a built-in piston magnet for legacy CS1-B/DS1-B switches.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X175S Technical Specifications
| Model | Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X175S |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | B06-SAID100X175S |
| Bore size | Ø100 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The B06-SAID100X175S carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
The B06-SAID100X175S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X175S
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X175S Is Used
Battery Cell Stacking
Applies equal both-ways force for precise, anti-rotation stacking of lithium battery cells during module assembly.
Dual-Tool Tab Welding
Drives two opposing welding tools for battery tab processing, utilizing the twin rods to maintain parallel alignment.
Pack Line Transfer
Handles battery packs on the conveyor line with equal push/pull force, using the G1/2 port for rapid actuation.
Replacing the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X175S with the B06-SAID100X175S
Replace the discontinued B06-SID100X175S directly with the SAID100X175S; it drops into the same ISO 15552 mounting interface using FA, LB, or TC brackets without dimensional changes. Size both ways by checking neighbor bores, as the equal-both-ways force remains 3681 N @0.5 MPa, 5153 N @0.7 MPa, and 6626 N @0.9 MPa. Choose a double-rod cylinder when you need anti-rotation stability or must drive two tools simultaneously. The -S magnet enables position sensing, though SAI uses current AirTAC switches. For this 175mm stroke, side-load alignment is manageable, but for any stroke >=300mm, verify guide rail support to prevent binding.
Replacement checklist
- ✓ Same ISO 15552 interface → B06-SAID100X175S
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X175S FAQ
Yes, the SID line is discontinued. The direct replacement is the SAID100X175S. The B06- prefix simply marks it as the battery-manufacturing dedicated variant; mechanically it is identical to the base SID100X175S. The SAID replacement shares the same ISO 15552 interface, 100mm bore, 175mm stroke, and G1/2 port.
Force is equal both ways: 3681 N @0.5 MPa, 5153 N @0.7 MPa, and 6626 N @0.9 MPa. A plain cylinder does not hold loads on air loss; the cushion only decelerates. For held loads, use an external rod lock or SAIL/BSAI variant.
Related AirTAC SAI Cylinders
Request a Quote for the B06-SAID100X175S
Send us the quantity and destination. We confirm price, stock and lead time on the B06-SAID100X175S replacement — usually within 7-8 hours.