This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement B06-SAID100X200S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X200S
The AirTAC Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X200S is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø100mm bore and 200mm stroke, G1/2 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the B06-SAID100X200S, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ100 mm
- Stroke200 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → B06-SAID100X200S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X200S
The AirTAC B06-SID100X200S is a double-acting, double-rod ISO 15552 cylinder where the B06- prefix marks it as a battery-manufacturing dedicated variant, mechanically identical to the standard SID100X200S. A rod exits both ends of the extruded aluminum profile barrel on a single piston, meaning both faces use the rod-side area to deliver equal push and pull force of 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and 6626 N at 0.9 MPa. This model is discontinued and end-of-life. The direct replacement is the SAID100X200S, which reuses the same ISO 15552 mounting interface, 100mm bore, 200mm stroke, G1/2 port, and M20x1.5 rod thread.
Because the second rod drives a sensor cam and resists rotation, the design is highly stable for precision battery stacking. The SAI replacement upgrades the piston seal to two Y-shaped one-way elements for lower start-up pressure and longer life. Note that a plain cylinder does not hold its load on air loss; the air cushion only decelerates near stroke end, so for held loads use an external rod lock or the SAIL/BSAI lock variants.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X200S Technical Specifications
| Model | Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X200S |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | B06-SAID100X200S |
| Bore size | Ø100 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The B06-SAID100X200S carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
The B06-SAID100X200S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X200S
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X200S Is Used
Battery Cell Stacking
Equal both-ways force and inherent anti-rotation from the double-rod design keep prismatic battery cells perfectly aligned during precision stacking operations.
Module Transfer Handling
Drives dual conveyors or synchronised pushers on battery module assembly lines, utilizing the G1/2 port and 3681 N force at 0.5 MPa for reliable part transfer.
Tab Welding Clamp
The rear rod carries a sensor cam for precise position feedback while the front rod actuates a clamping fixture for battery tab welding.
Replacing the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X200S with the B06-SAID100X200S
To replace the discontinued B06-SID100X200S, specify the SAID100X200S. It is a direct swap: the ISO 15552 mounting interface, 100mm bore, 200mm stroke, G1/2 port, and M20x1.5 rod thread are identical. Size both ways by checking the equal push/pull force (3681 N at 0.5 MPa, 5153 N at 0.7 MPa, 6626 N at 0.9 MPa); if you need less force, step down to the 80mm bore (2268 N at 0.5 MPa), or step up to the 125mm bore (5734 N at 0.5 MPa) for more. Choose a double-rod cylinder when you need anti-rotation stability or must drive two tools simultaneously. Mounting options include Basic, FA, LB, and TC. The -S suffix means a piston magnet is present for legacy CS1-B/DS1-B switches (the SAI replacement uses current AirTAC switches). For strokes of 300mm or longer, carefully manage side-load alignment to prevent premature seal wear.
Replacement checklist
- ✓ Same ISO 15552 interface → B06-SAID100X200S
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X200S FAQ
Yes, the B06-SID100X200S is discontinued. The direct replacement is the SAID100X200S. The B06- prefix simply marks it as a battery-manufacturing dedicated variant of the base SID100X200S, so mechanically it is identical. The SAID100X200S matches the ISO 15552 mounting interface, 100mm bore, 200mm stroke, G1/2 port, and force, but adds an upgraded piston seal.
Because it is a double-rod cylinder, force is equal both ways: 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and 6626 N at 0.9 MPa. The air port is G1/2. Remember that the air cushion only decelerates near stroke end; it does not hold the load on air loss, so use an external rod lock for held loads.
Related AirTAC SAI Cylinders
Request a Quote for the B06-SAID100X200S
Send us the quantity and destination. We confirm price, stock and lead time on the B06-SAID100X200S replacement — usually within 7-8 hours.