This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement B06-SAID100X250S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X250S
The AirTAC Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X250S is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø100mm bore and 250mm stroke, G1/2 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the B06-SAID100X250S, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ100 mm
- Stroke250 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → B06-SAID100X250S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X250S
The AirTAC B06-SID100X250S is a double-acting, double-rod ISO 15552 cylinder where a rod exits both ends, making push and pull force equal at 3681 N @0.5 MPa. The B06- prefix marks this as a battery-manufacturing dedicated variant, mechanically identical to the base SID100X250S with a 100mm bore, 250mm stroke, and G1/2 port. This legacy model is discontinued and is fully replaced by the SAID100X250S.
The SAID direct replacement shares the exact ISO 15552 mounting interface and adds an upgraded piston seal with two Y-shaped one-way elements for lower start-up pressure. The dual-rod design prevents rotation and allows the back rod to carry a sensor cam. Note that air cushions only decelerate; use an external rod lock for load holding.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X250S Technical Specifications
| Model | Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X250S |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | B06-SAID100X250S |
| Bore size | Ø100 mm |
| Stroke | 250 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The B06-SAID100X250S carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
The B06-SAID100X250S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X250S
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×250 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X250S Is Used
Battery Cell Stacking
Applies equal both-ways push and pull force for precise, anti-rotation stacking of battery cells during module assembly.
Pack Handling Transfer
Drives dual-tool carriers on conveyor lines, using the second rod to mount a sensor cam for accurate position tracking.
Tab Welding Clamp
Provides stable, equal clamping and retraction forces for battery tab welding fixtures without rotational drift.
Replacing the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X250S with the B06-SAID100X250S
To replace the discontinued B06-SID100X250S, use the SAID100X250S, which matches the 100mm bore, 250mm stroke, G1/2 port, and ISO 15552 dimensions. Because force is equal both ways (3681 N @0.5 MPa), you can size both directions identically; if less force is needed, step down to an 80mm bore (2268 N), or up to 125mm (5734 N) for higher demands. Choose a double-rod configuration when anti-rotation or a back-end sensor cam is required. Mounting options include FA, LB, and TC brackets. The -S suffix indicates a piston magnet for legacy CS1-B/DS1-B switches. For strokes >=300mm, ensure adequate side-load guidance to prevent rod binding.
Replacement checklist
- ✓ Same ISO 15552 interface → B06-SAID100X250S
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X250S FAQ
Yes, the B06-SID100X250S is discontinued. The direct replacement is the SAID100X250S. The B06- prefix simply denotes the battery-manufacturing dedicated variant, so the SAID replacement matches the 100mm bore, 250mm stroke, G1/2 port, and ISO 15552 mounting interface exactly, while adding an upgraded piston seal.
Force is equal in both push and pull directions at 3681 N @0.5 MPa, 5153 N @0.7 MPa, and 6626 N @0.9 MPa. The cylinder features a G1/2 air port, a 25mm piston rod, and adjustable 36mm cushions at each end.
Related AirTAC SAI Cylinders
Request a Quote for the B06-SAID100X250S
Send us the quantity and destination. We confirm price, stock and lead time on the B06-SAID100X250S replacement — usually within 7-8 hours.