This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement B06-SAID100X400, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X400
The AirTAC Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X400 is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø100mm bore and 400mm stroke, G1/2 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the B06-SAID100X400, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ100 mm
- Stroke400 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → B06-SAID100X400
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X400
The AirTAC B06-SID100X400 is a discontinued double-rod ISO 15552 cylinder where the B06- prefix designates it as a battery-manufacturing dedicated variant of the base SID100X400, mechanically identical with a 100mm bore, 400mm stroke, G1/2 port, and M20x1.5 rod thread. Because a rod exits both ends on one piston, push and pull force are equal at 3681N @0.5MPa, 5153N @0.7MPa, and 6626N @0.9MPa. The direct replacement is the SAID100X400, which reuses the same ISO 15552 mounting interface and adds an upgraded piston seal with two Y-shaped one-way elements for lower start-up pressure and longer life.
This SKU lacks a magnet (-S) and cannot accept magnetic switches. A plain cylinder does not hold loads on air loss; the 36mm adjustable air cushions only decelerate near stroke end, so use an external rod lock or pilot-operated check valve for held loads. For the 400mm stroke, external guides are recommended to prevent rod bending under side loads.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X400 Technical Specifications
| Model | Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X400 |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | B06-SAID100X400 |
| Bore size | Ø100 mm |
| Stroke | 400 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The B06-SAID100X400 carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
The B06-SAID100X400 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X400
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×400 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X400 Is Used
Battery Cell Stacking
Applies equal both ways push/pull force for precise cell stacking and alignment in module assembly lines, utilizing the 3681N @0.5MPa output to handle heavy battery arrays without rotational drift.
Pack Handling Transfer
Drives dual-tool mechanisms from both rod ends to simultaneously push and pull battery packs during conveyor transfer, ensuring synchronous movement and stable deceleration via the 36mm cushions.
Tab Welding Press
Provides stable clamping for battery tab welding operations where the 400mm stroke requires external guides; the double-rod design prevents piston yaw during high-speed 30-800mm/s indexing.
Replacing the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X400 with the B06-SAID100X400
To replace the discontinued B06-SID100X400, use the SAID100X400 direct; it preserves the ISO 15552 mounting interface, 1500mm max standard stroke, and 30-800mm/s speed. Size both ways by checking neighbor bores (80mm or 125mm) if you need to adjust the equal both ways force. A double rod is right when you need anti-rotation stability, or when the back rod carries a sensor cam or drives two tools simultaneously. Reuse FA, LB, or TC mounts. Since this SKU has no -S magnet, sensing is impossible. For the 400mm stroke, add external guides to manage side-load and rod-bending risks.
Replacement checklist
- ✓ Same ISO 15552 interface → B06-SAID100X400
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X400 FAQ
Yes, the B06-SID100X400 (battery-manufacturing dedicated variant of SID100X400) is discontinued. The direct replacement is the SAID100X400. It shares the identical ISO 15552 interface, 100mm bore, 400mm stroke, G1/2 port, and mounting, but adds an upgraded piston seal. The B06- prefix is an application designation only and does not change physical specs.
Force is equal both ways: 3681N @0.5MPa, 5153N @0.7MPa, and 6626N @0.9MPa. The air port is G1/2. Speed is 30-800mm/s. Note that air cushions only decelerate; they do not hold loads on air loss.
Related AirTAC SAI Cylinders
Request a Quote for the B06-SAID100X400
Send us the quantity and destination. We confirm price, stock and lead time on the B06-SAID100X400 replacement — usually within 7-8 hours.