This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement B06-SAID100X450S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X450S
The AirTAC Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X450S is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø100mm bore and 450mm stroke, G1/2 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the B06-SAID100X450S, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ100 mm
- Stroke450 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → B06-SAID100X450S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X450S
The AirTAC B06-SID100X450S is a double-acting, double-rod ISO 15552 cylinder where a rod exits both ends, making push and pull force equal at 3681 N @0.5 MPa. The B06- prefix marks this as a battery-manufacturing dedicated variant, mechanically identical to the base SID100X450S. This discontinued model uses a G1/2 port, M20x1.5 rod thread, and 36mm adjustable cushions. The direct replacement is the SAID100X450S, retaining the same interface and force.
The SAI upgrade features a two Y-shaped one-way piston seal for low start-up pressure and long life. A plain cylinder drifts on air loss; cushions only decelerate, so use an external rod lock for held loads.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X450S Technical Specifications
| Model | Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X450S |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | B06-SAID100X450S |
| Bore size | Ø100 mm |
| Stroke | 450 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The B06-SAID100X450S carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
The B06-SAID100X450S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X450S
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X450S Is Used
Battery Cell Stacking
Applies equal both-ways force for precise, anti-rotation stacking of battery cells during module assembly.
Pack Transfer Handling
Drives dual pushers simultaneously from a single cylinder, ensuring synchronized pack transfer on the line.
Tab Welding Clamp
Uses the back rod to carry a sensor cam for position feedback while the front rod clamps tabs for welding.
Replacing the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X450S with the B06-SAID100X450S
To replace the B06-SID100X450S, specify SAID100X450S for an exact ISO 15552 direct match. Size both ways by checking neighbor bores (80mm or 125mm) if you need to adjust the 3681 N @0.5 MPa equal force. Choose a double-rod when you need anti-rotation, to drive two tools, or to mount a sensor cam on the back rod. Reuse FA, LB, or TC mounts. The -S magnet fits legacy CS1-B/DS1-B switches. For the 450mm stroke, add external guides to prevent rod bending under side loads.
Replacement checklist
- ✓ Same ISO 15552 interface → B06-SAID100X450S
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X450S FAQ
Yes, the B06-SID100X450S (battery-manufacturing dedicated variant of SID100X450S) is discontinued. The direct replacement is the SAID100X450S, offering the same ISO 15552 interface, 100mm bore, 450mm stroke, G1/2 port, and equal both-ways force.
Force is equal both ways: 3681 N @0.5 MPa, 5153 N @0.7 MPa, and 6626 N @0.9 MPa. Operating pressure is 0.15-1.0 MPa, and speed ranges 30-800 mm/s. The cylinder uses a G1/2 port and 36mm adjustable cushions.
Related AirTAC SAI Cylinders
Request a Quote for the B06-SAID100X450S
Send us the quantity and destination. We confirm price, stock and lead time on the B06-SAID100X450S replacement — usually within 7-8 hours.