This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement B06-SAID100X50S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X50S
The AirTAC Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X50S is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø100mm bore and 50mm stroke, G1/2 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the B06-SAID100X50S, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ100 mm
- Stroke50 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → B06-SAID100X50S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X50S
The AirTAC B06-SID100X50S is a double-acting, double-rod ISO 15552 cylinder where the rod exits both ends, generating equal force in both directions (3681 N at 0.5 MPa). The B06- prefix marks this as a battery-manufacturing dedicated variant, mechanically identical to the standard SID100X50S. It features a 100mm bore, G1/2 port, M20x1.5 rod thread, and 36mm adjustable cushions. This discontinued model is fully replaced by the SAID100X50S.
The SAID100X50S direct replacement retains the exact ISO 15552 interface, bore, stroke, and mounting options (Basic, FA, LB, TC). It upgrades the piston seal to two Y-shaped one-way elements for lower start-up pressure and longer life. Note that air cushions only decelerate; use an external rod lock for load holding.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X50S Technical Specifications
| Model | Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X50S |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | B06-SAID100X50S |
| Bore size | Ø100 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The B06-SAID100X50S carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
The B06-SAID100X50S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X50S
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X50S Is Used
Battery Cell Stacking
Drives precision stacking mechanisms in lithium-ion cell assembly, utilizing the equal both-ways force to maintain consistent pressure on both extend and retract strokes.
Module Tab Welding
Actuates dual-tool welding heads from opposite sides of a battery module, leveraging the double-rod architecture to carry a sensor cam on the back rod for precise position feedback.
Pack Handling Transfer
Indexes battery packs along the conveyor line, where the rigid double-rod output prevents rotational twist during high-speed lateral transfers.
Replacing the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X50S with the B06-SAID100X50S
To replace the discontinued B06-SID100X50S, select the SAID100X50S, which matches the 100mm bore, 50mm stroke, G1/2 port, and ISO 15552 mounting footprint (Basic, FA, LB, TC). The double-rod design provides equal push/pull force (5153 N at 0.7 MPa), making it ideal when a tool is driven on both ends or when anti-rotation stability is required. If sizing neighboring bores, use the equal both-ways force ratings to match your load. The -S suffix indicates a piston magnet for legacy CS1-B/DS1-B switches. For stroke lengths of 300mm or more, verify side-load limits to prevent guide wear.
Replacement checklist
- ✓ Same ISO 15552 interface → B06-SAID100X50S
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X50S FAQ
Yes, the B06-SID100X50S is discontinued. The direct replacement is the SAID100X50S. The B06- prefix simply denotes it as a battery-manufacturing dedicated variant of the base SID100X50S. The SAID100X50S shares the exact same ISO 15552 mounting interface, 100mm bore, 50mm stroke, G1/2 port, and force ratings, but features an upgraded piston seal for longer life.
Because it is a double-rod cylinder, the force is equal both ways: 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and 6626 N at 0.9 MPa. The operating speed ranges from 30 to 800 mm/s. Remember that a plain cylinder does not hold loads on air loss; the 36mm adjustable cushions only decelerate near stroke end, so use an external rod lock or SAIL/BSAI variant for held loads.
Related AirTAC SAI Cylinders
Request a Quote for the B06-SAID100X50S
Send us the quantity and destination. We confirm price, stock and lead time on the B06-SAID100X50S replacement — usually within 7-8 hours.