This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement B06-SAID100X600S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X600S
The AirTAC Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X600S is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø100mm bore and 600mm stroke, G1/2 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the B06-SAID100X600S, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ100 mm
- Stroke600 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → B06-SAID100X600S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X600S
The AirTAC B06-SID100X600S is a double-acting, double-rod ISO 15552 cylinder where the B06- prefix marks it as a battery-manufacturing dedicated variant, mechanically identical to the standard SID100X600S. Because a rod exits both ends on one piston, both faces use the rod-side area, making push and pull force equal at 3681 N @0.5 MPa, 5153 N @0.7 MPa, and 6626 N @0.9 MPa. The bore is 100 mm, the port is G1/2, and the rod thread is M20x1.5. This SID model is discontinued; the direct replacement is the SAID100X600S, which retains the same interface, bore, stroke, and mounting.
The double-rod design prevents rod-side rotation and lets the back rod carry a sensor cam or drive a second tool simultaneously. The SAI replacement upgrades the piston seal to two Y-shaped one-way elements for lower start-up pressure and longer life. The -S suffix denotes a built-in piston magnet for legacy CS1-B/DS1-B switches. Note that a plain cylinder does not hold loads on air loss; the 36 mm adjustable cushions only decelerate near stroke end, so use an external rod lock or SAIL/BSAI variant for held loads.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X600S Technical Specifications
| Model | Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X600S |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | B06-SAID100X600S |
| Bore size | Ø100 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The B06-SAID100X600S carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
The B06-SAID100X600S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X600S
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X600S Is Used
Battery Cell Stacking
Equal push/pull force precisely indexes prismatic cells during stacking, while the back rod runs a sensor cam to verify stack height without extra fixtures.
Module Transfer Handling
Drives a dual-sided transfer carriage on the battery module assembly line, using the double-rod anti-rotation property to keep heavy pallets aligned.
Pack Tab Welding Press
Applies consistent 3681 N clamping force at 0.5 MPa for busbar tab welding, with the second rod simultaneously actuating a parallel voltage probe.
Replacing the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X600S with the B06-SAID100X600S
To replace the discontinued B06-SID100X600S, specify the SAID100X600S direct: it matches the 100 mm bore, 600 mm stroke, G1/2 port, M20x1.5 thread, and ISO 15552 mounting (Basic, FA, LB, TC, FTC, TCM1, TCM2). Size both directions by the equal-both-ways force (3681 N @0.5 MPa); if you need less force, step down to the 80 mm bore (2268 N @0.5 MPa), or step up to 125 mm (5734 N @0.5 MPa) for more. A double rod is right when you need anti-rotation, a back-rod sensor cam, or two-tool drive. Keep the -S magnet for CS1-B/DS1-B sensors. Because the 600 mm stroke is long, add external guides to prevent rod bending under side loads.
Replacement checklist
- ✓ Same ISO 15552 interface → B06-SAID100X600S
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X600S FAQ
Yes, the B06-SID100X600S is discontinued. The direct replacement is the SAID100X600S. The B06- prefix only marks it as a battery-manufacturing dedicated variant; mechanically it is identical to the SID100X600S. The SAID replacement shares the same ISO 15552 interface, 100 mm bore, 600 mm stroke, G1/2 port, and mounting, but adds an upgraded Y-shaped piston seal.
Force is equal both ways because both faces use the rod-side area: 3681 N @0.5 MPa, 5153 N @0.7 MPa, and 6626 N @0.9 MPa. Speed is 30-800 mm/s. The rod is Ø25 mm with an M20x1.5 thread, a G1/2 port, and 36 mm adjustable cushions at each end. It cannot hold a load on air loss; use an external rod lock for held loads.
Related AirTAC SAI Cylinders
Request a Quote for the B06-SAID100X600S
Send us the quantity and destination. We confirm price, stock and lead time on the B06-SAID100X600S replacement — usually within 7-8 hours.