This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement B06-SAID100X75S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X75S
The AirTAC Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X75S is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø100mm bore and 75mm stroke, G1/2 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the B06-SAID100X75S, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ100 mm
- Stroke75 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → B06-SAID100X75S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X75S
The AirTAC B06-SID100X75S is a double-acting, double-rod ISO 15552 cylinder where the battery-manufacturing dedicated B06- prefix denotes a variant mechanically identical to the base SID100X75S. A rod exits both ends on one piston, meaning both faces use the rod-side area and push/pull force is equal both ways (3681 N at 0.5 MPa). It features a 100mm bore, G1/2 air port, M20x1.5 rod-end thread, and 36mm adjustable air cushions. This SID model is discontinued and the direct replacement is the SAID100X75S.
The SAID upgrade introduces an upgraded piston seal using two Y-shaped one-way elements for low start-up pressure and long life, while retaining the ISO 15552 mounting interface, bore, and stroke. Because the second rod can carry a sensor cam or drive two tools simultaneously, it provides inherent anti-rotation benefits. Note that a plain cylinder does not hold loads on air loss; the cushion only decelerates near stroke end, so use an external rod lock or SAIL/BSAI variant for held loads.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X75S Technical Specifications
| Model | Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X75S |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | B06-SAID100X75S |
| Bore size | Ø100 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The B06-SAID100X75S carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
The B06-SAID100X75S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X75S
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X75S Is Used
Battery Cell Stacking
Equal both-ways force ensures precise, anti-rotation pressure when stacking battery cells in module assembly, utilizing the G1/2 port for rapid cycling.
Pack Handling Transfer
Drives dual-tool pickers on a conveyor line for battery pack handling, where the second rod maintains synchronous movement without rotational drift.
Tab Welding Clamp
Provides stable clamping for battery tab welding operations, using adjustable 36mm cushions to decelerate the 100mm bore smoothly at stroke ends.
Replacing the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X75S with the B06-SAID100X75S
To replace the discontinued B06-SID100X75S, specify the SAID100X75S, which matches the 100mm bore, 75mm stroke, G1/2 port, and ISO 15552 mounting footprint exactly. Because force is equal both ways, verify your push and pull requirements against the 3681 N rating at 0.5 MPa; if you need less force, step down to the 80mm bore (2268 N), or step up to the 125mm bore (5734 N) for more power. A double-rod design is the right choice when you need anti-rotation stability, want to drive two tools from one cylinder, or need to mount a sensor cam on the back rod. Reuse existing FA, LB, or TC mounts. The -S suffix indicates a piston magnet for legacy CS1-B/DS1-B switches (current AirTAC switches are used on the SAI replacement). For this 75mm stroke, side-load concerns are minimal, but for strokes >=300mm ensure guide alignment to prevent rod binding.
Replacement checklist
- ✓ Same ISO 15552 interface → B06-SAID100X75S
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X75S FAQ
Yes, the B06-SID100X75S is discontinued. The direct replacement is the SAID100X75S. The B06- prefix simply marks it as the battery-manufacturing dedicated variant of the base SID100X75S, so mechanically it is identical. The SAID replacement shares the same ISO 15552 interface, 100mm bore, 75mm stroke, G1/2 port, and mounting options, but adds an upgraded piston seal.
Because it is a double-rod cylinder, the push and pull force are equal both ways: 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and 6626 N at 0.9 MPa. The air port size is G1/2. Do not confuse this with a single-rod push value. The cylinder operates at 30-800 mm/s and uses a 25mm piston rod with an M20x1.5 thread.
Related AirTAC SAI Cylinders
Request a Quote for the B06-SAID100X75S
Send us the quantity and destination. We confirm price, stock and lead time on the B06-SAID100X75S replacement — usually within 7-8 hours.