This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement B06-SAID100X800S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X800S
The AirTAC Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X800S is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø100mm bore and 800mm stroke, G1/2 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the B06-SAID100X800S, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ100 mm
- Stroke800 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → B06-SAID100X800S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X800S
The AirTAC B06-SID100X800S is a double-acting, double-rod ISO 15552 cylinder where the rod exits both ends, yielding equal push and pull force of 3681 N at 0.5 MPa. The B06- prefix marks this as a battery-manufacturing dedicated variant, mechanically identical to the standard SID100X800S. This bore features a 25 mm rod, M20x1.5 thread, and a G1/2 port. As the SID line is discontinued, the direct replacement is the SAID100X800S, retaining the same interface, stroke, and mounting.
The SAI replacement upgrades the piston seal to two Y-shaped one-way elements for lower start-up pressure and longer life. A double-rod design prevents rotation and lets the rear rod carry a sensor cam. Note that air cushions only decelerate; for load holding on air loss, use an external rod lock or SAIL/BSAI variant.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X800S Technical Specifications
| Model | Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X800S |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | B06-SAID100X800S |
| Bore size | Ø100 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The B06-SAID100X800S carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
The B06-SAID100X800S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X800S
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X800S Is Used
Battery Cell Stacking
Applies equal both-ways force for precise stacking of battery cells, utilizing the double-rod design to prevent piston rotation during assembly.
Module Handling
Transfers heavy battery modules along the line, taking advantage of the 3681 N @0.5 MPa force and G1/2 port for rapid, stable actuation.
Pack Tabbing
Drives dual tooling stations simultaneously using both extending rods, ensuring synchronized tab welding on battery packs.
Replacing the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X800S with the B06-SAID100X800S
To replace the discontinued B06-SID100X800S, select the SAID100X800S, which offers an identical ISO 15552 mounting interface, 800 mm stroke, and equal both-ways force. When sizing, verify the 3681 N @0.5 MPa force is sufficient, or step to a 125 mm bore if more thrust is needed. A double-rod cylinder is ideal when you need anti-rotation stability or must drive two tools simultaneously. Reuse FA, LB, or TC mounts directly. The -S suffix indicates a piston magnet for legacy CS1-B/DS1-B switches. Because the 800 mm stroke is long, use external guides to prevent rod bending and side loads.
Replacement checklist
- ✓ Same ISO 15552 interface → B06-SAID100X800S
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X800S FAQ
Yes, the SID line is discontinued. The B06- prefix simply designates this as a battery-manufacturing dedicated variant of the base model. The direct replacement is the SAID100X800S, which shares the identical ISO 15552 interface, 100 mm bore, 800 mm stroke, and mounting hardware.
Because it is a double-rod cylinder, the push and pull forces are equal both ways: 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and 6626 N at 0.9 MPa. The air port is G1/2. Remember that the air cushion only decelerates the load; it does not hold position on air loss.
Related AirTAC SAI Cylinders
Request a Quote for the B06-SAID100X800S
Send us the quantity and destination. We confirm price, stock and lead time on the B06-SAID100X800S replacement — usually within 7-8 hours.