This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement B06-SAID100X80S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X80S
The AirTAC Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X80S is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø100mm bore and 80mm stroke, G1/2 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the B06-SAID100X80S, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ100 mm
- Stroke80 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → B06-SAID100X80S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X80S
The AirTAC B06-SID100X80S is a discontinued ISO 15552 double-acting double-rod cylinder where the B06- prefix marks it as a battery-manufacturing dedicated variant, mechanically identical to the base SID100X80S. Because a rod exits both ends on one piston, both faces use the rod-side area, making push and pull force equal at 3681 N @0.5 MPa, 5153 N @0.7 MPa, and 6626 N @0.9 MPa. The bore is 100 mm, the port is G1/2, the rod thread is M20x1.5, and it includes a -S magnet for legacy CS1-B/DS1-B switches. The direct replacement is the SAID100X80S, which reuses the exact ISO 15552 mounting interface and porting.
The double-rod design provides inherent anti-rotation properties and allows the back rod to carry a sensor cam, which is highly useful for cell stacking and tabbing in battery lines. The SAI replacement upgrades the piston seal to two Y-shaped one-way elements for lower start-up pressure and longer life. Note that a plain cylinder does not hold its load on air loss; the 36 mm adjustable air cushion only decelerates near stroke end, so use an external rod lock or pilot-operated check valve for held loads.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X80S Technical Specifications
| Model | Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X80S |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | B06-SAID100X80S |
| Bore size | Ø100 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The B06-SAID100X80S carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
The B06-SAID100X80S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X80S
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X80S Is Used
Battery Cell Stacking
Uses the equal both-ways force and anti-rotation properties of the double rod to precisely press and stack battery cells without deflection during module assembly.
Pack Handling Transfer
Drives two synchronized clamps or pushers from a single cylinder body, moving battery packs between conveyor belts with stable equal-force motion.
Tab Welding Press
Applies a consistent 3681 N @0.5 MPa force for tab welding operations, while the back rod carries a sensor cam to confirm exact press position.
Replacing the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X80S with the B06-SAID100X80S
To replace the discontinued B06-SID100X80S, select the SAID100X80S, which offers a direct ISO 15552 interchange via mounting-interface dimensions, matching the G1/2 port and M20x1.5 rod thread. When sizing both ways, verify your load against the equal both-ways force (3681 N @0.5 MPa) and consider neighbouring bores (80 mm or 125 mm) if you need to adjust the working load. A double rod is right when you need anti-rotation stability or need to drive two tools simultaneously. Mounting options include Basic, FA, LB, and TC. Keep the -S magnet for CS1-B/DS1-B switches (the SAI replacement uses current AirTAC switches). For this 80 mm stroke, side-load is minimal, but for strokes >=300 mm ensure proper guide support to prevent binding.
Replacement checklist
- ✓ Same ISO 15552 interface → B06-SAID100X80S
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X80S FAQ
Yes, the B06-SID100X80S is discontinued. The B06- prefix designates it as a battery-manufacturing dedicated variant of the base SID100X80S, and the direct replacement is the SAID100X80S. The SAID replacement shares the same ISO 15552 mounting interface, 100 mm bore, 80 mm stroke, G1/2 port, and equal both-ways force, but uses an upgraded piston seal and current AirTAC switches.
Because it is a double-rod cylinder, the push and pull force are equal both ways: 3681 N @0.5 MPa, 5153 N @0.7 MPa, and 6626 N @0.9 MPa. The operating pressure is 0.15-1.0 MPa, the speed range is 30-800 mm/s, and the adjustable air cushion is 36 mm at each end.
Related AirTAC SAI Cylinders
Request a Quote for the B06-SAID100X80S
Send us the quantity and destination. We confirm price, stock and lead time on the B06-SAID100X80S replacement — usually within 7-8 hours.