This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement B06-SAID32X100, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X100
The AirTAC Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X100 is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø32mm bore and 100mm stroke, G1/8 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the B06-SAID32X100, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke100 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → B06-SAID32X100
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X100
The AirTAC B06-SID32X100 is a double-acting, double-rod ISO 15552 cylinder where a rod exits both ends, ensuring push and pull force are equal (345 N @0.5 MPa). The B06- prefix marks this as a battery-manufacturing dedicated variant of the base SID32X100, mechanically identical to it for cell and pack assembly lines. Featuring a 32 mm bore, 12 mm rod, G1/8 port, and M10x1.25 thread, this discontinued model is fully replaced by the direct replacement SAID32X100. The SAI successor uses an upgraded piston seal with two Y-shaped one-way elements for low start-up pressure and long life.
Because the rear rod can carry a sensor cam or drive a second tool simultaneously, this configuration provides excellent anti-rotation stability. Note this non-magnetic SKU (-S omitted) cannot accept a sensor switch. A plain cylinder does not hold loads on air loss; the 27 mm adjustable cushions only decelerate near stroke end, so use an external rod lock or SAIL variant for held loads.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X100 Technical Specifications
| Model | Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X100 |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | B06-SAID32X100 |
| Bore size | Ø32 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The B06-SAID32X100 carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The B06-SAID32X100 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X100
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X100 Is Used
Battery Cell Stacking
Aligns and pushes prismatic battery cells into modules with equal push/pull force, preventing rotation during precise stacking operations.
Module Transfer Handling
Uses the dual-rod architecture to drive a transfer carriage on the front stroke while a rear cam manages a secondary gate without torsional deflection.
Tab Welding Press
Applies a stable 345 N clamping force for battery tab welding, where the equal both-ways action ensures consistent electrode contact.
Replacing the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X100 with the B06-SAID32X100
To replace the discontinued B06-SID32X100, specify the exact direct replacement SAID32X100, which matches the 32 mm bore, 100 mm stroke, G1/8 port, and ISO 15552 mounting interface (Basic, FA, LB, TC). When sizing, remember the double-rod design yields equal force both ways (345 N @0.5, 483 N @0.7, 621 N @0.9 MPa); if more force is needed, step up to the 40 mm bore (528 N @0.5 MPa). Choose a double-rod cylinder when anti-rotation control is critical or when the back rod must drive a second mechanism. Reuse existing FA, LB, or TC mounts directly. For stroke lengths of 300 mm or longer, verify side-load limits to prevent guide wear. This SKU lacks the -S magnet and cannot support sensing.
Replacement checklist
- ✓ Same ISO 15552 interface → B06-SAID32X100
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X100 FAQ
Yes, the B06-SID32X100 is discontinued. The direct replacement is the SAID32X100. The B06- prefix simply denotes the battery-manufacturing dedicated variant; mechanically, it is identical to the standard SID32X100. The SAID successor shares the same ISO 15552 interface, 32 mm bore, 100 mm stroke, G1/8 port, and mounting, but adds an upgraded piston seal.
Because the double-rod design uses the rod-side area on both faces, force is equal both ways: 345 N @0.5 MPa, 483 N @0.7 MPa, and 621 N @0.9 MPa. The air port is G1/8, the rod thread is M10x1.25, and it features a 27 mm adjustable cushion at each end.
Related AirTAC SAI Cylinders
Request a Quote for the B06-SAID32X100
Send us the quantity and destination. We confirm price, stock and lead time on the B06-SAID32X100 replacement — usually within 7-8 hours.