Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X160S
AirTAC B06-SID32X160S Battery-Powered ISO Cylinder Specifications
- Model: B06-SID32X160S
- Type: ISO 6431 standard single-acting spring return cylinder
- Bore size: 32mm
- Stroke: 160mm (±0.5mm tolerance)
- Operating pressure: 0.05–0.9 MPa
- Cushioning type: Adjustable rubber buffer (both ends)
- Material: Aluminum alloy body, NBR seals
- Temperature range: -20℃ to 80℃ (continuous operation)
- Mounting: ISO 6431 standard mounting (multiple bracket options)
- Weight: 1.25kg (excluding accessories)
- Dimensions: 240mm(L) × 50mm(W) × 50mm(H) (fully retracted)
- Rod thread: M10×1.25 external thread
- Protection rating: IP65 (dust-tight & water jet resistant)
- Max thrust: 245N @ 0.6MPa
- Lubrication: Pre-lubricated (maintenance-free for 2,000km stroke)
High-efficiency pneumatic cylinder optimized for battery-powered systems, featuring 30% reduced air consumption compared to standard models. The anodized barrel surface provides enhanced wear resistance, while the double-lip rod seal ensures leak-free operation in vertical installations. Integrated magnet slot (optional) enables position sensing compatibility.
- AGV (Automated Guided Vehicle) lifting mechanisms
- Portable medical oxygen concentrators
- Solar-powered agricultural actuators
- Battery-operated packaging equipment
- Mobile robotics joint articulation
- EV battery module handling systems
Installation note:
Maintain 0.5mm minimum clearance between rod end and load during alignment.
For vertical mounting, use tandem cylinders or external guides when handling
eccentric loads exceeding 3kg. Lubricate pivot points monthly in high-cycle
applications (>500 cycles/day).
| Property | Property Value |
|---|---|
| sku | B06-SID32X160S |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.