This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement B06-SAID32X175S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X175S
The AirTAC Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X175S is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø32mm bore and 175mm stroke, G1/8 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the B06-SAID32X175S, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke175 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → B06-SAID32X175S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X175S
The AirTAC B06-SID32X175S is a double-acting, double-rod ISO 15552 cylinder where the B06- prefix designates it as a battery-manufacturing dedicated variant, mechanically identical to the standard SID32X175S. Because a rod exits both ends on one piston, both faces use the rod-side area, yielding equal force both ways (345 N @0.5 MPa). It features a 32 mm bore, G1/8 port, M10x1.25 rod thread, and 27 mm adjustable air cushions at each end. This SID model is discontinued and is directly replaced by the SAID32X175S.
The direct replacement SAID32X175S shares the exact ISO 15552 mounting interface, bore, stroke, and port, while upgrading to a two Y-shaped one-way piston seal for lower start-up pressure and longer life. The -S suffix indicates a built-in piston magnet for legacy CS1-B/DS1-B switches. Note that air cushions only decelerate near stroke end; for load holding on air loss, use an external rod lock or SAIL/BSAI variant.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X175S Technical Specifications
| Model | Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X175S |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | B06-SAID32X175S |
| Bore size | Ø32 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The B06-SAID32X175S carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The B06-SAID32X175S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X175S
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X175S Is Used
Battery Cell Stacking
Equal both-ways force drives precision stacking mechanisms in prismatic cell assembly, ensuring consistent pressure on both extend and retract strokes.
Module Transfer Handling
The double-rod anti-rotation特性 keeps battery modules aligned during conveyor transfers, preventing yaw during high-speed indexing.
Tab Welding Clamps
Drives two synchronized welding tabs simultaneously using both rod ends, maintaining parallel clamping force for busbar attachment.
Replacing the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X175S with the B06-SAID32X175S
To replace the discontinued B06-SID32X175S, select the direct replacement SAID32X175S, which preserves the ISO 15552 mounting interface, 32 mm bore, 175 mm stroke, G1/8 port, and equal both-ways force. When sizing both ways, verify your push and pull requirements against the 345 N @0.5 MPa rating; if higher force is needed, step up to the 40 mm bore (528 N @0.5 MPa), or drop to a smaller bore if lower force suffices. A double-rod design is right when you need anti-rotation stability, the ability to drive two tools, or a back rod to carry a sensor cam. Mounting options include Basic, FA, LB, and TC. The -S magnet supports legacy CS1-B/DS1-B sensors. For this 175 mm stroke, side-load alignment is manageable, but for strokes >=300 mm, carefully calculate guide rod support to prevent binding.
Replacement checklist
- ✓ Same ISO 15552 interface → B06-SAID32X175S
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X175S FAQ
Yes, the B06-SID32X175S is discontinued. The direct replacement is the SAID32X175S. The B06- prefix simply marks it as a battery-manufacturing dedicated variant; mechanically, it is identical to the SID32X175S. The SAID replacement shares the same ISO 15552 mounting interface, 32 mm bore, 175 mm stroke, and G1/8 port.
Force is equal both ways due to the double-rod design: 345 N @0.5 MPa, 483 N @0.7 MPa, and 621 N @0.9 MPa. Operating pressure is 0.15-1.0 MPa. Speed ranges from 30-800 mm/s. The cylinder features a 12 mm rod, M10x1.25 thread, and 27 mm adjustable cushions. It does not hold loads on air loss; use an external rod lock for held loads.
Related AirTAC SAI Cylinders
Request a Quote for the B06-SAID32X175S
Send us the quantity and destination. We confirm price, stock and lead time on the B06-SAID32X175S replacement — usually within 7-8 hours.