This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement B06-SAID32X200S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X200S
The AirTAC Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X200S is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø32mm bore and 200mm stroke, G1/8 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the B06-SAID32X200S, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke200 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → B06-SAID32X200S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X200S
The AirTAC B06-SID32X200S is a double-acting, double-rod ISO 15552 cylinder where the B06- prefix designates it as a battery-manufacturing dedicated variant of the base SID32X200S, mechanically identical in every specification. Because a rod exits both ends on a single piston, both faces use the rod-side area, making push and pull force equal at 345 N @0.5 MPa, 483 N @0.7 MPa, and 621 N @0.9 MPa. The bore is 32 mm, the piston rod is Ø12 mm, and the air port is G1/8. This SID model is discontinued and the direct replacement is the SAID32X200S, which retains the same ISO 15552 mounting interface, bore, stroke, and porting.
The SAI replacement family introduces an upgraded piston seal using two Y-shaped one-way elements for low start-up pressure and long life, alongside SAIL and BSAI lock variants absent in the legacy SI line. For motion logic, the rear rod can carry a sensor cam to drive two tools or provide anti-rotation stability without extra guides. The standard -S magnet supports legacy CS1-B/DS1-B switches. Remember that air cushions only decelerate near stroke end; this cylinder will not hold a load on air loss without an external rod lock or pilot-operated check valve.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X200S Technical Specifications
| Model | Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X200S |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | B06-SAID32X200S |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The B06-SAID32X200S carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The B06-SAID32X200S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X200S
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X200S Is Used
Battery Cell Stacking
Applies equal both-ways force for precise stacking and pressing of battery cells during module assembly, using the dual-rod design to prevent platform rotation.
Pack Alignment Station
Positions battery packs for wrapping or binding operations, utilizing the G1/8 port and 200 mm stroke to push and pull components with identical 345 N force at 0.5 MPa.
Replacing the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X200S with the B06-SAID32X200S
To replace the discontinued B06-SID32X200S, specify the SAID32X200S, which is a direct swap retaining the 32 mm bore, 200 mm stroke, G1/8 port, and ISO 15552 mounting interface. When sizing, verify both ways force is sufficient for your push and pull operations; if higher force is needed, step up to the 40 mm bore (528 N @0.5 MPa) or drop to a smaller size if oversizing. A double-rod design is the right choice when you need equal force in both directions, anti-rotation resistance, or a back rod to mount a sensor cam. You can reuse FA, LB, or TC mounts directly. The included -S magnet allows for position sensing. For strokes of 300 mm or longer, carefully manage side-load alignment to prevent premature seal wear and guide failure.
Replacement checklist
- ✓ Same ISO 15552 interface → B06-SAID32X200S
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X200S FAQ
Yes, the B06-SID32X200S is discontinued. The direct replacement is the SAID32X200S. The B06- prefix simply marks it as the battery-manufacturing dedicated variant of the base SID32X200S, so the SAID32X200S matches it mechanically with the same 32 mm bore, 200 mm stroke, G1/8 port, and ISO 15552 mounting.
Because it is a double-rod cylinder, force is equal both ways: 345 N @0.5 MPa, 483 N @0.7 MPa, and 621 N @0.9 MPa. The air port is G1/8, the rod is Ø12 mm with an M10x1.25 thread, and it includes an adjustable 27 mm air cushion at each end.
Related AirTAC SAI Cylinders
Request a Quote for the B06-SAID32X200S
Send us the quantity and destination. We confirm price, stock and lead time on the B06-SAID32X200S replacement — usually within 7-8 hours.