This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement B06-SAID32X350S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X350S
The AirTAC Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X350S is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø32mm bore and 350mm stroke, G1/8 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the B06-SAID32X350S, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke350 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → B06-SAID32X350S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X350S
The AirTAC B06-SID32X350S is a double-acting, double-rod ISO 15552 cylinder where a rod exits both ends, making push and pull force equal at 345 N @0.5 MPa. The B06- prefix marks this as a battery-manufacturing dedicated variant of the base SID32X350S, mechanically identical in every spec. This discontinued model drops in directly with the SAID32X350S, reusing the same G1/8 port, M10x1.25 rod thread, and ISO 15552 mounting interface.
The double-rod design prevents rotation and lets the rear rod carry a sensor cam, while the SAI replacement upgrades the piston seal to two Y-shaped one-way elements for lower start-up pressure. Note that air cushions only decelerate; for load holding without live air, use an external rod lock or SAIL variant.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X350S Technical Specifications
| Model | Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X350S |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | B06-SAID32X350S |
| Bore size | Ø32 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The B06-SAID32X350S carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The B06-SAID32X350S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X350S
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X350S Is Used
Cell Stacking Assembly
Applies equal both-ways clamping for battery cell stacking, using the rear rod to mount a sensor cam for precise positioning.
Module Handling Transfer
Drives dual tooling on a battery module line, leveraging the anti-rotation properties of the double-rod design for stable transfers.
Tab Welding Positioning
Handles delicate battery tab welding placement, where the 18 kg vertical lift margin and stable parallel motion ensure joint accuracy.
Replacing the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X350S with the B06-SAID32X350S
To replace the discontinued B06-SID32X350S, use the SAID32X350S, which matches the 32mm bore, 350mm stroke, G1/8 port, and ISO 15552 mounting. When sizing both ways, verify the equal force fits your load, or step to neighboring bores like 40mm (528 N @0.5 MPa). A double rod is right when you need anti-rotation or to drive two tools. Reuse FA, LB, or TC mounts. The -S magnet fits legacy CS1-B/DS1-B switches. For this 350mm stroke, use external guides to prevent rod bending under side loads.
Replacement checklist
- ✓ Same ISO 15552 interface → B06-SAID32X350S
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X350S FAQ
Yes, the B06-SID32X350S is discontinued. The direct replacement is the SAID32X350S. The B06- prefix simply denotes the battery-manufacturing dedicated variant; mechanically, it is identical to the SID32X350S. The SAID replacement shares the same ISO 15552 mounting, 32mm bore, 350mm stroke, G1/8 port, and force, but adds an upgraded piston seal.
Force is equal both ways: 345 N @0.5 MPa, 483 N @0.7 MPa, and 621 N @0.9 MPa. Speed is 30-800 mm/s. The port is G1/8, the rod thread is M10x1.25, and it features 27mm adjustable air cushions at each end. Remember, cushions only decelerate; they do not hold loads on air loss.
Related AirTAC SAI Cylinders
Request a Quote for the B06-SAID32X350S
Send us the quantity and destination. We confirm price, stock and lead time on the B06-SAID32X350S replacement — usually within 7-8 hours.