This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement B06-SAID32X400S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X400S
The AirTAC Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X400S is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø32mm bore and 400mm stroke, G1/8 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the B06-SAID32X400S, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke400 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → B06-SAID32X400S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X400S
The AirTAC B06-SID32X400S is a double-acting, double-rod ISO 15552 cylinder where the B06- prefix designates it as a battery-manufacturing dedicated variant, mechanically identical to the standard SID32X400S. Because a rod exits both ends on a single piston, both faces use the rod-side area, making push and pull force equal at 345 N @0.5 MPa, 483 N @0.7 MPa, and 621 N @0.9 MPa. It features a 32 mm bore, G1/8 port, M10x1.25 rod thread, and 27 mm adjustable air cushions. This SID model is discontinued; the direct replacement is the SAID32X400S, which shares the same interface, bore, stroke, and mounting.
The double-rod architecture provides anti-rotation stability and allows the rear rod to carry a sensor cam, while the upgraded SAI replacement piston seal uses two Y-shaped one-way elements for low start-up pressure and long life. The built-in -S piston magnet supports legacy CS1-B/DS1-B switches. Note that air cushions only decelerate near stroke end; a plain cylinder does not hold loads on air loss, so an external rod lock or pilot-operated check valve is required for held loads.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X400S Technical Specifications
| Model | Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X400S |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | B06-SAID32X400S |
| Bore size | Ø32 mm |
| Stroke | 400 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The B06-SAID32X400S carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The B06-SAID32X400S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X400S
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×400 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X400S Is Used
Cell Stacking Assembly
Applies equal both-ways force for precise electrode stacking in battery cell production, using the rear rod to mount a sensor cam for strict positioning.
Module Handling Transfer
Drives dual pick-and-place actions on the battery module line, leveraging the double-rod anti-rotation property to prevent drift during rapid transfers.
Pack Case Loading
Pushes and pulls battery packs into packaging fixtures with identical force in both directions, ensuring gentle, balanced insertion without twisting.
Replacing the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X400S with the B06-SAID32X400S
To replace the discontinued B06-SID32X400S, specify the SAID32X400S, which is a direct swap retaining the ISO 15552 mounting interface, 32 mm bore, 400 mm stroke, G1/8 port, and equal both-ways force. When sizing both ways, verify the 345 N @0.5 MPa force fits your load, or step up to a 40 mm bore if more force is needed. A double rod is right when you need anti-rotation resistance or want to drive two tools simultaneously. Reuse FA, LB, or TC mounts. The -S magnet enables position sensing. Because the stroke is 400 mm, add external guides to prevent rod bending under side loads.
Replacement checklist
- ✓ Same ISO 15552 interface → B06-SAID32X400S
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X400S FAQ
Yes, the B06-SID32X400S is discontinued. The direct replacement is the SAID32X400S. The B06- prefix simply marks it as a battery-manufacturing dedicated variant, so the SAID32X400S matches its 32 mm bore, 400 mm stroke, G1/8 port, and ISO 15552 mounting perfectly.
Because it is a double-rod cylinder, force is equal both ways: 345 N @0.5 MPa, 483 N @0.7 MPa, and 621 N @0.9 MPa. The bore is 32 mm with a G1/8 air port, M10x1.25 rod thread, and 27 mm adjustable cushions.
Related AirTAC SAI Cylinders
Request a Quote for the B06-SAID32X400S
Send us the quantity and destination. We confirm price, stock and lead time on the B06-SAID32X400S replacement — usually within 7-8 hours.