This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement B06-SAID32X450, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X450
The AirTAC Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X450 is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø32mm bore and 450mm stroke, G1/8 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the B06-SAID32X450, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke450 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → B06-SAID32X450
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X450
The AirTAC B06-SID32X450 is a double-acting, double-rod ISO 15552 cylinder where the B06- prefix marks it as a battery-manufacturing dedicated variant, mechanically identical to the standard SID32X450. Because a rod exits both ends, the push and pull forces are equal (345 N @0.5 MPa). This model is discontinued; the direct replacement is the SAID32X450, which reuses the same ISO 15552 mounting interface, G1/8 port, and 450 mm stroke. The SAI family upgrades the piston seal to two Y-shaped one-way elements for lower start-up pressure and longer life.
A key double-rod benefit is anti-rotation, allowing a rear rod to carry a sensor cam or drive two tools simultaneously. Without a -S suffix, this SKU cannot accept a magnetic switch. Note that air cushions only decelerate the piston near stroke end; they do not hold loads on air loss, so an external rod lock or pilot-operated check valve is required for held loads.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X450 Technical Specifications
| Model | Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X450 |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | B06-SAID32X450 |
| Bore size | Ø32 mm |
| Stroke | 450 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The B06-SAID32X450 carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The B06-SAID32X450 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X450
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X450 Is Used
Cell Stacking Alignment
Applies equal both-ways force for precise, anti-rotational pressing during prismatic cell stacking and electrode alignment in battery module assembly.
Tab Handling & Transfer
Drives dual-tool end effectors to pick and place battery tabs, utilizing the double-rod configuration to maintain synchronous movement without twist.
Pack Case Insertion
Pushes battery cells into pack housings with consistent 345 N force at 0.5 MPa, ensuring gentle but firm seating during automated pack line integration.
Replacing the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X450 with the B06-SAID32X450
To replace the discontinued B06-SID32X450, specify the SAID32X450, which offers a direct swap retaining the 32 mm bore, 450 mm stroke, G1/8 port, and M10x1.25 rod thread. When sizing both ways, verify the equal force fits your needs: 345 N @0.5 MPa, 483 N @0.7 MPa, and 621 N @0.9 MPa. If higher force is required, step up to the neighbouring 40 mm bore. A double rod is the right choice when anti-rotation rigidity is needed or when the back rod must drive a second mechanism. Mounting options include Basic, FA, LB, and TC brackets. Because this unit lacks the -S magnet, it cannot use magnetic switches. Finally, at 450 mm stroke, use external guides to prevent rod bending and side-load damage.
Replacement checklist
- ✓ Same ISO 15552 interface → B06-SAID32X450
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X450 FAQ
Yes, the B06-SID32X450 (battery-manufacturing dedicated variant of SID32X450) is discontinued. The direct replacement is the SAID32X450. It shares the identical ISO 15552 interface, 32 mm bore, 450 mm stroke, G1/8 port, and mounting dimensions. The B06- prefix only denotes the battery industry application scope and does not change the physical specs.
Because it is a double-rod cylinder, force is equal both ways: 345 N @0.5 MPa, 483 N @0.7 MPa, and 621 N @0.9 MPa. The air port is G1/8, the rod thread is M10x1.25, and adjustable air cushions are 27 mm at each end. Operating pressure is 0.15-1.0 MPa with a speed range of 30-800 mm/s.
Related AirTAC SAI Cylinders
Request a Quote for the B06-SAID32X450
Send us the quantity and destination. We confirm price, stock and lead time on the B06-SAID32X450 replacement — usually within 7-8 hours.