This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement B06-SAID32X500, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X500
The AirTAC Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X500 is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø32mm bore and 500mm stroke, G1/8 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the B06-SAID32X500, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke500 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → B06-SAID32X500
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X500
The AirTAC B06-SID32X500 is a double-acting, double-rod ISO 15552 cylinder where the rod exits both ends, ensuring force is equal both ways at 345 N @0.5 MPa, 483 N @0.7 MPa, and 621 N @0.9 MPa. The B06- prefix marks this as a battery-manufacturing dedicated variant, mechanically identical to the base SID32X500. This discontinued model drops directly into existing ISO 15552 mounting interfaces (FA, LB, TC) with a G1/8 port and M10x1.25 rod thread.
The direct replacement is the SAID32X500, which adds an upgraded piston seal using two Y-shaped one-way elements for low start-up pressure and long life. Because two rods share the piston, anti-rotation stability is inherent and the back rod can drive a second tool. Note this SKU lacks a -S magnet and cannot accept sensors.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X500 Technical Specifications
| Model | Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X500 |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | B06-SAID32X500 |
| Bore size | Ø32 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The B06-SAID32X500 carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The B06-SAID32X500 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X500
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X500 Is Used
Cell Stacking Alignment
Applies equal both-ways force for precise electrode stacking in battery cell assembly, utilizing the inherent anti-rotation property of the double-rod design to maintain parallelism.
Module Transfer Handling
Drives dual-tool pick-and-place mechanisms on battery module lines, leveraging the back rod for cam actuation while the front rod handles part transfer.
Pack Case Sealing
Performs symmetrical clamping and sealing operations on battery pack housings, ensuring consistent pressure during the packaging process.
Replacing the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X500 with the B06-SAID32X500
To replace the discontinued B06-SID32X500, use the SAID32X500; it preserves the 32 mm bore, 500 mm stroke, G1/8 port, and equal-both-ways force. Size both ways by confirming 345 N @0.5 MPa is sufficient, or step up to a 40 mm bore if more force is needed. A double rod is right when you need anti-rotation stability or dual-tool actuation. Reuse FA, LB, or TC mounts. For the 500 mm stroke, use external guides to prevent rod bending under side loads. This non-magnetic SKU cannot take switches; if sensing is needed, select a -S model. For held loads, use an external rod lock or SAIL/BSAI variant, as cushions only decelerate.
Replacement checklist
- ✓ Same ISO 15552 interface → B06-SAID32X500
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X500 FAQ
Yes, the B06-SID32X500 (battery-manufacturing dedicated variant of SID32X500) is discontinued. The direct replacement is the SAID32X500, which shares the identical ISO 15552 mounting interface, 32 mm bore, 500 mm stroke, G1/8 port, and force ratings.
Force is equal both ways due to the double-rod design: 345 N @0.5 MPa, 483 N @0.7 MPa, and 621 N @0.9 MPa. The air port is G1/8.
Related AirTAC SAI Cylinders
Request a Quote for the B06-SAID32X500
Send us the quantity and destination. We confirm price, stock and lead time on the B06-SAID32X500 replacement — usually within 7-8 hours.