This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement B06-SAID32X75, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X75
The AirTAC Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X75 is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø32mm bore and 75mm stroke, G1/8 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the B06-SAID32X75, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke75 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → B06-SAID32X75
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X75
The AirTAC B06-SID32X75 is a double-acting, double-rod ISO 15552 cylinder where the rod exits both ends, making push and pull force equal at 345 N @0.5 MPa. The B06- prefix marks this as a battery-manufacturing dedicated variant, mechanically identical to the base SID32X75 with a 32mm bore, 75mm stroke, and G1/8 port. This SID model is discontinued; the direct replacement is the SAID32X75, which reuses the same ISO 15552 mounting interface and adds an upgraded two Y-shaped one-way piston seal for lower start-up pressure.
Because both faces use the rod-side area, the equal-both-ways force prevents rod drift asymmetry, and the rear rod can drive a second tool. With no -S suffix, this SKU lacks a magnet and cannot take a sensor. Note that air cushions only decelerate; for load holding on air loss, use an external rod lock or SAIL/BSAI variant.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X75 Technical Specifications
| Model | Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X75 |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | B06-SAID32X75 |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The B06-SAID32X75 carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The B06-SAID32X75 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X75
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X75 Is Used
Cell Stacking Alignment
Applies equal both-ways clamping to align prismatic cells during stacking, preventing rotation and ensuring precise electrode positioning.
Module Transfer Pusher
Drives a dual-ended transfer mechanism on the battery module line, using the rear rod to sync a secondary gate without extra valves.
Replacing the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X75 with the B06-SAID32X75
To replace the discontinued B06-SID32X75, specify the SAID32X75, which matches the 32mm bore, 75mm stroke, G1/8 port, and ISO 15552 mounting. Size both directions by the equal force: 345 N @0.5 MPa. If more force is needed, step up to the 40mm bore (528 N @0.5 MPa). A double rod is right when you need anti-rotation, equal push/pull, or a back rod for a sensor cam. Mounting uses FA, LB, or TC brackets. Since this is a no-S model, it cannot accept magnetic switches. For this 75mm stroke, side-load is minimal, but for strokes >=300mm, ensure guide alignment to prevent binding.
Replacement checklist
- ✓ Same ISO 15552 interface → B06-SAID32X75
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X75 FAQ
Yes, the B06-SID32X75 is discontinued. The direct replacement is the SAID32X75. The B06- prefix simply marks it as a battery-manufacturing dedicated variant; mechanically, it is identical to the base SID32X75. The SAID32X75 matches the 32mm bore, 75mm stroke, G1/8 port, and ISO 15552 mounting, while adding an upgraded piston seal.
Being a double-rod cylinder, force is equal both ways: 345 N @0.5 MPa, 483 N @0.7 MPa, and 621 N @0.9 MPa. It uses a G1/8 port, M10x1.25 rod thread, and adjustable 27mm cushions. Speed is 30-800 mm/s. It has no magnet, so it cannot use sensors.
Related AirTAC SAI Cylinders
Request a Quote for the B06-SAID32X75
Send us the quantity and destination. We confirm price, stock and lead time on the B06-SAID32X75 replacement — usually within 7-8 hours.