This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement B06-SAID40X150, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID40X150
The AirTAC Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID40X150 is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø40mm bore and 150mm stroke, G1/4 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the B06-SAID40X150, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ40 mm
- Stroke150 mm
- Port sizeG1/4
- Acting typeDouble acting
- Rod threadM12×1.25
- StatusDiscontinued → B06-SAID40X150
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID40X150
The AirTAC B06-SID40X150 is a double-acting, double-rod ISO 15552 cylinder where a rod exits both ends on one piston, ensuring push and pull force are equal at 528 N @0.5 MPa, 739 N @0.7 MPa, and 950 N @0.9 MPa. The B06- prefix marks this as a battery-manufacturing dedicated variant of the base SID40X150, mechanically identical with a 40 mm bore, 150 mm stroke, 16 mm rod, M12x1.25 thread, and G1/4 port. This SID model is discontinued and is replaced by the direct replacement SAID40X150.
The SAI replacement uses an upgraded piston seal with two Y-shaped one-way elements for low start-up pressure and long life. The dual-rod design prevents rotation and allows driving two tools simultaneously. Note this non-magnetic SKU cannot take a switch, and air cushions only decelerate; use an external rod lock for held loads.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID40X150 Technical Specifications
| Model | Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID40X150 |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | B06-SAID40X150 |
| Bore size | Ø40 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max standard stroke | Up to 1200 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The B06-SAID40X150 carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
The B06-SAID40X150 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID40X150
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 40 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID40X150 Is Used
Cell Stacking Alignment
Applies equal both-ways force for precise electrode stacking in prismatic cell assembly, using the dual rods to prevent rotational drift.
Module Transfer Handling
Drives two synchronized tooling arms from one piston for battery module handling, ensuring balanced movement without adding a second cylinder.
Pack Line Indexing
Indexes battery packs on the line with equal push and pull force, maintaining stable deceleration via the 27 mm adjustable air cushions.
Replacing the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID40X150 with the B06-SAID40X150
Replace the discontinued B06-SID40X150 directly with the SAID40X150, which matches the ISO 15552 interface, 150 mm stroke, and G1/4 port. Size both ways by confirming the 528 N @0.5 MPa equal force is sufficient, or step to a 50 mm bore if more force is needed. A double rod is right when you need anti-rotation or a back rod to carry a sensor cam. Reuse FA, LB, or TC mounts. This SKU lacks the -S magnet and cannot take sensors. For stroke lengths >=300 mm, verify side-load bearing limits.
Replacement checklist
- ✓ Same ISO 15552 interface → B06-SAID40X150
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID40X150 FAQ
Yes, the B06-SID40X150 (a battery-manufacturing dedicated variant of the SID40X150) is discontinued. The direct replacement is the SAID40X150, sharing the same ISO 15552 mounting, 40 mm bore, 150 mm stroke, and G1/4 port.
Force is equal both ways at 528 N @0.5 MPa, 739 N @0.7 MPa, and 950 N @0.9 MPa. The air port is G1/4.
Related AirTAC SAI Cylinders
Request a Quote for the B06-SAID40X150
Send us the quantity and destination. We confirm price, stock and lead time on the B06-SAID40X150 replacement — usually within 7-8 hours.