This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement B06-SAID40X175S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID40X175S
The AirTAC Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID40X175S is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø40mm bore and 175mm stroke, G1/4 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the B06-SAID40X175S, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ40 mm
- Stroke175 mm
- Port sizeG1/4
- Acting typeDouble acting
- Rod threadM12×1.25
- StatusDiscontinued → B06-SAID40X175S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID40X175S
The B06-SID40X175S is an AirTAC double-rod ISO 15552 cylinder where the B06- prefix marks it as a battery-manufacturing dedicated variant, mechanically identical to the standard SID40X175S. Because a rod exits both ends on one piston, both faces use the rod-side area, making push and pull force equal at 528 N @0.5 MPa. This model is discontinued; the direct replacement is the SAID40X175S, which adds an upgraded two Y-shaped one-way piston seal for lower start-up pressure and longer life. It features a Ø16 mm rod, M12x1.25 thread, 27 mm adjustable cushions, and a G1/4 port.
For battery line integration, the double-rod design provides anti-rotation stability and allows the back rod to carry a sensor cam, while ISO 15552 mounting (FA, LB, TC) ensures exact frame reuse. The -S suffix indicates a piston magnet for legacy CS1-B/DS1-B switches. Note that air cushions only decelerate; for load holding on air loss, use an external rod lock or the SAIL/BSAI lock variant.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID40X175S Technical Specifications
| Model | Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID40X175S |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | B06-SAID40X175S |
| Bore size | Ø40 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max standard stroke | Up to 1200 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The B06-SAID40X175S carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
The B06-SAID40X175S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID40X175S
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 40 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID40X175S Is Used
Cell Stacking Alignment
Applies equal both-ways force to precisely stack battery cells without rotation, ensuring flat, consistent electrode layering in module assembly.
Tab Handling Transfer
Drives dual-tooling ends to pick and place battery tabs simultaneously, cutting cycle time on high-speed pack assembly conveyors.
Module Clamping Press
Holds battery modules steady during wire bonding or welding, using the back rod to trigger a legacy CS1-B sensor cam for press confirmation.
Replacing the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID40X175S with the B06-SAID40X175S
To replace the discontinued B06-SID40X175S, specify the SAID40X175S. It preserves the 40 mm bore, 175 mm stroke, G1/4 port, and ISO 15552 mounting interface. When sizing both ways, verify the equal 528 N (@0.5 MPa) force fits your load; if more force is needed, step up to the 50 mm bore (825 N), or drop to the 32 mm bore (345 N) for lighter duties. A double rod is right when you need anti-rotation resistance or want to drive two tools simultaneously. Select FA, LB, or TC mounts to match your existing frame. The -S magnet is present for position sensing. For strokes of 175 mm, side-load alignment is generally forgiving, but for any stroke over 300 mm, maintain strict guide alignment to prevent rod binding.
Replacement checklist
- ✓ Same ISO 15552 interface → B06-SAID40X175S
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID40X175S FAQ
Yes, the B06-SID40X175S (battery-manufacturing dedicated variant of SID40X175S) is discontinued. The direct replacement is the SAID40X175S. It shares the identical ISO 15552 interface, 40 mm bore, 175 mm stroke, G1/4 port, and equal both-ways force, but adds an upgraded piston seal.
Force is equal both ways (push and pull) because both faces use the rod-side area: 528 N @0.5 MPa, 739 N @0.7 MPa, and 950 N @0.9 MPa. The air port is G1/4.
Related AirTAC SAI Cylinders
Request a Quote for the B06-SAID40X175S
Send us the quantity and destination. We confirm price, stock and lead time on the B06-SAID40X175S replacement — usually within 7-8 hours.