This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement B06-SAID40X200, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID40X200
The AirTAC Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID40X200 is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø40mm bore and 200mm stroke, G1/4 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the B06-SAID40X200, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ40 mm
- Stroke200 mm
- Port sizeG1/4
- Acting typeDouble acting
- Rod threadM12×1.25
- StatusDiscontinued → B06-SAID40X200
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID40X200
The AirTAC B06-SID40X200 is a double-acting, double-rod ISO 15552 cylinder where the rod exits both ends, making push and pull force equal at 528 N (@0.5 MPa). The B06- prefix marks this as a battery-manufacturing dedicated variant of the base SID40X200, mechanically identical to it for cell and pack assembly lines. This SID model is discontinued; the direct replacement is the SAID40X200, which reuses the same G1/4 port, M12x1.25 thread, and ISO 15552 mounting interface.
Because both faces use the rod-side area, force is equal both ways. The SAI replacement upgrades the piston seal with two Y-shaped one-way elements for low start-up pressure. Note this non-magnetic SKU cannot take a sensor switch, and a plain cylinder drifts on air loss—the cushion only decelerates, so use an external rod lock for held loads.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID40X200 Technical Specifications
| Model | Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID40X200 |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | B06-SAID40X200 |
| Bore size | Ø40 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max standard stroke | Up to 1200 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The B06-SAID40X200 carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
The B06-SAID40X200 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID40X200
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 40 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID40X200 Is Used
Cell Stacking Alignment
Equal push and pull force precisely indexes prismatic battery cells into stacking fixtures without rotational drift.
Tab Welding Clamp
Drives dual welding electrodes simultaneously from both rod ends, ensuring balanced contact pressure on cell tabs.
Module Transfer
Anti-rotation dual-rod motion pushes battery modules across conveyor lanes with stable, equal-force transfer.
Replacing the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID40X200 with the B06-SAID40X200
To replace the discontinued B06-SID40X200, specify the SAID40X200; it is a direct swap retaining the 40mm bore, 200mm stroke, G1/4 port, and FA/LB/TC mountings. Size both ways by checking the 528 N (@0.5 MPa) equal force against neighbor bores (32mm at 345 N or 50mm at 825 N) to ensure your battery-tabbing tool has enough push and pull. A double rod is right when you need anti-rotation stability or need to drive two tools. This SKU lacks the -S magnet, so it cannot accept legacy CS1-B/DS1-B sensors. For stroke lengths >=300mm, verify side-load limits to prevent binding.
Replacement checklist
- ✓ Same ISO 15552 interface → B06-SAID40X200
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID40X200 FAQ
Yes, the B06-SID40X200 (battery-manufacturing dedicated SID40X200) is discontinued. The direct replacement is the SAID40X200, which shares the same ISO 15552 interface, 40mm bore, 200mm stroke, G1/4 port, and equal-both-ways force.
Force is equal both ways: 528 N @0.5 MPa, 739 N @0.7 MPa, and 950 N @0.9 MPa. The bore dictates a fixed G1/4 air port, M12x1.25 rod thread, and 27mm adjustable cushions. Speed is 30-800 mm/s.
Related AirTAC SAI Cylinders
Request a Quote for the B06-SAID40X200
Send us the quantity and destination. We confirm price, stock and lead time on the B06-SAID40X200 replacement — usually within 7-8 hours.