Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID40X700
AirTAC B06-SID40X700 Battery-Optimized ISO Cylinder Specifications
- Model: B06-SID40X700
- Series: SID (Battery System Integrated Design)
- Bore size: 40mm (ISO 6432 standard)
- Stroke: 700mm ±1.5mm tolerance
- Operating pressure: 0.05–0.8 MPa
- Temperature range: -20℃ to 80℃
- Cushioning: Adjustable elastic buffer + impact absorber
- Port size: M5x0.8 (dual ports both ends)
- Mounting type: MF1 (basic front flange)
- Rod end: External M10x1.25 thread
- Cylinder material: Aluminum alloy (anodized finish)
- Seal material: Heat-resistant NBR + graphite coating
- Battery compatibility: 12-48V DC systems
- Weight: 2.85kg (without mounting accessories)
- Dimensions: 978mm(L) × 60mm(W) × 60mm(H)
- ISO certification: ISO 6432:2015 compliant
- Protection rating: IP67 (dust/water resistant)
- Lubrication: Pre-lubed (Molykote 33M)
High-efficiency pneumatic cylinder engineered for battery-powered automation systems, featuring low-friction seals reducing 23% air consumption compared to standard models. The dual-chamber design prevents electrolyte corrosion, with integrated mounting slots for battery pack attachments. Requires 5μm filtered air with dew point -25℃ below ambient.
- Lithium battery cell stacking mechanisms
- Automated battery module compression systems
- Material handling in battery recycling plants
- High-cycle electrode plate pressing (1500+ cycles/day)
- Solar battery panel alignment robots
- EV battery swap station actuators
Installation protocol:
Use vibration-damping mounts when operating above 2Hz frequency.
Align piston rod within 0.2mm perpendicular tolerance.
Apply 32# anti-wear hydraulic oil monthly in high-cycling environments.
| Property | Property Value |
|---|---|
| sku | B06-SID40X700 |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.