This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is B06-SAID63X75 — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the B06-SAID63X75 in place of this model. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID63X75
The AirTAC Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID63X75 is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø63mm bore and 75mm stroke, G3/8 air ports and adjustable end cushioning. This model is discontinued — the drop-in replacement is the B06-SAID63X75, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ63 mm
- Stroke75 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- StatusDiscontinued → B06-SAID63X75
About the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID63X75
The AirTAC B06-SID63X75 is a double-acting, double-rod ISO 15552 cylinder where the B06- prefix designates it as a battery-manufacturing dedicated variant, mechanically identical to the standard SID63X75. A rod exits both ends on one piston, meaning both faces use the rod-side area and push/pull force is equal both ways (1402 N @0.5 MPa). This model is discontinued; the exact drop-in replacement is the SAID63X75, which shares the same G3/8 port, M16x1.5 rod thread, and ISO 15552 mounting interface. The SAI upgrade also introduces a two Y-shaped one-way piston seal for lower start-up pressure and longer life.
Because the second rod passes through the rear cover, it provides inherent anti-rotation properties and can drive two tools simultaneously. For sizing, the safe working load is roughly 841 N (about 60% of the 1402 N @0.5 MPa figure), translating to a vertical lift capacity of approximately 71 kg with a 2:1 margin. Note this SKU lacks the -S magnet and cannot accept a sensor. A plain cylinder does not hold loads on air loss; the 30 mm adjustable cushions only decelerate near stroke end, so use an external rod lock for held loads.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID63X75 Technical Specifications
| Model | Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID63X75 |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | B06-SAID63X75 |
| Bore size | Ø63 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The B06-SAID63X75 carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
The B06-SAID63X75 produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID63X75
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 63 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID63X75 Is Used
Cell Stacking Press
Applies equal both-ways force for stacking electrode sheets in battery cell assembly, utilizing the double-rod's inherent anti-rotation properties to maintain parallelism.
Tab Welding Transfer
Drives a dual-tool pick-and-place mechanism for battery tab handling, ensuring synchronous movement without drift thanks to the matched push and pull areas.
Module Pack Indexing
Indexes battery modules along the pack assembly line with a safe working load of 841 N, relying on adjustable cushions to decelerate at stroke end.
Replacing the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID63X75 with the B06-SAID63X75
To replace the discontinued B06-SID63X75, specify the SAID63X75. It is a true drop-in swap: identical 63 mm bore, 75 mm stroke, 1402 N equal-both-ways force @0.5 MPa, G3/8 port, and ISO 15552 mounting dimensions (Basic, FA, LB, TC). When sizing both ways, verify your load against the 1402 N @0.5 MPa rating; if you need less force, the neighbouring 50 mm bore offers 825 N, while the 80 mm bore provides 2268 N. A double-rod design is the right choice when you need anti-rotation resistance or must drive two mechanisms from one piston. Because this SKU has no -S magnet, it cannot use magnetic switches. For strokes of 300 mm or longer, carefully manage side-load moments to prevent premature seal wear.
Replacement checklist
- ✓ Same ISO 15552 interface → B06-SAID63X75
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID63X75 FAQ
Yes, the B06-SID63X75 is discontinued. The exact drop-in replacement is the SAID63X75. The B06- prefix simply marks it as a battery-manufacturing dedicated variant; mechanically, it is identical to the SID63X75. The SAID63X75 matches its 63 mm bore, 75 mm stroke, G3/8 port, and ISO 15552 mounting.
Because it is a double-rod cylinder, force is equal both ways: 1402 N @0.5 MPa, 1962 N @0.7 MPa, and 2523 N @0.9 MPa. The air port is G3/8. It operates at 30-800 mm/s and features a 20 mm rod with an M16x1.5 thread.
Related AirTAC SAI Cylinders
Request a Quote for the B06-SAID63X75
Send us the quantity and destination. We confirm price, stock and lead time on the B06-SAID63X75 replacement — usually within 7-8 hours.