Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID63X75
The AirTAC B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID63X75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 75mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke75 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID63X75
The AirTAC B06-SAID63X75 is a double-acting, double-rod ISO 15552 profile cylinder. The B06- prefix designates this as a battery-manufacturing dedicated variant of the SAID63X75, mechanically identical to the base model but tailored for cell, module, and pack assembly lines. Because a rod exits both ends, the annulus area is equal on both sides, yielding a consistent 1402 N of force in both extend and retract directions at 0.5 MPa.
This twin-rod design provides superior anti-rotation stability and allows a rear rod end to drive a secondary mechanism or mount a position flag. The extruded aluminum barrel features sensor grooves on both sides for flexible CMSE or DMSE switch mounting. It uses a G3/8 port, a 20 mm carbon steel rod, and adjustable air cushions at both ends to decelerate the piston smoothly.
Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID63X75 Technical Specifications
| Model | Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID63X75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID63X75
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID63X75 Is Used
Battery Cell Stacking
Provides equal force and anti-rotation stability for precise electrode or separator stacking in cell assembly machines.
Symmetric Transfer
Drives dual-sided transfer arms in module handling lines where matching extend and retract speeds prevent cell misalignment.
Tab Welding Clamp
Uses the rear rod end to mount a secondary cam or sensor flag, timing the weld clamp perfectly for battery tabbing.
Is the Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID63X75 the Right Cylinder?
Select this 63 mm bore cylinder when your battery-handling fixture requires equal push and pull forces (1402 N each way at 0.5 MPa) or needs dual-side guidance to prevent rotation. If your application demands less force, stepping down to a 50 mm bore yields 825 N both ways; stepping up to an 80 mm bore provides 2268 N. Unlike a single-rod SAI, this double-rod configuration ensures symmetric speed and force, which is critical for synchronized stacking or tabbing operations.
As a standard double-acting cylinder, it will drift if air pressure is lost and cannot hold a load mid-stroke without external locking. For battery lines requiring position holding on air exhaustion, consider the SAIL or BSAID variants. This model is dimensionally interchangeable per ISO 15552, uses a PT tapered port thread, and supports mountings Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID63X75 FAQ
The B06- prefix indicates this is AirTAC's battery-manufacturing dedicated line of the SAID63X75. It is mechanically identical to the standard SAID63X75, with the same 63 mm bore, 75 mm stroke, and G3/8 port, but designated for battery cell, module, and pack assembly applications.
Because it is a double-rod cylinder, the push and pull forces are identical. It delivers 1402 N of force in both directions at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID63X75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.