Airtac BSE Clamp Standard Cylinder BSE32X800S
The AirTAC Airtac BSE Clamp Standard Cylinder BSE32X800S is a genuine double-acting ISO 15552 cylinder with an integrated spring-applied, air-released ROD LOCK. If air is cut or an E-stop is hit, the collet clamps the Ø12mm rod and holds up to 600 N in either direction — no drift. Ø32mm bore, 800mm stroke, PT1/8 cylinder ports, G1/8 lock-release port.
- BoreØ32 mm
- Stroke800 mm
- Static holding force600 N
- Lock typeSpring-lock / air-release
- Cylinder portPT1/8
- Lock-release portG1/8
About the Airtac BSE Clamp Standard Cylinder BSE32X800S
The AirTAC BSE32X800S is a double-acting, single-rod ISO 15552 profile cylinder featuring an integrated spring-applied, air-released rod lock. A collet clamps the 12 mm rod automatically, delivering a 600 N bidirectional static holding force with zero live air required. If air pressure drops or an E-stop trips, the rod is safely held in place at its stopped position.
The lock releases via a separate G1/8 port at 0.15-0.7 MPa, while the main cylinder operates up to 0.7 MPa. Because this is a made-to-order 800 mm stroke—exceeding the 700 mm standard—you must account for side loads. The -S magnet option supports CMSE reed and DMSE electronic sensors for position detection.
Rod Lock — 600 N Static Holding (Ø32mm)
A spring clamps the collet onto the rod, so the Airtac BSE Clamp Standard Cylinder BSE32X800S holds its position in both directions when air is lost, exhausted or an E-stop trips. Apply 0.15–0.7 MPa to the G1/8 release port to unlock. Engage the lock only after the rod has stopped (it is not a dynamic brake), and release only when the pressures on both sides of the piston are balanced. Allow at least 0.5 s for full release before moving.
Airtac BSE Clamp Standard Cylinder BSE32X800S Technical Specifications
| Model | Airtac BSE Clamp Standard Cylinder BSE32X800S |
|---|---|
| Series | BSE ISO 15552 rod-lock cylinder |
| Bore size | Ø32 mm |
| Stroke | 800 mm |
| Static holding force | 600 N |
| Cylinder port | PT1/8 |
| Lock-release port | G1/8 |
| Rod thread | M10×1.25 |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Unlocking pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 700 mm |
Specifications follow the official AirTAC BSE datasheet. The lock uses the SE standard body; SE mounting accessories fit BSE except FTC. Port options: PT (standard) / G (BSPP); lock-release port is G1/8.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa (max) | 563 N | — |
| Max drive (@0.7 MPa) | 57 kgf | |
Drive force is separate from the 600 N static holding force of the lock. BSE operates up to 0.7 MPa. Size with a safety margin.
Model Code: Airtac BSE Clamp Standard Cylinder BSE32X800S
| B | Rod-lock cylinder prefix. |
|---|---|
| SE | ISO 15552 standard double-acting body. |
| 32 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Thread: PT (blank) / G. Mounting (BSE): Basic, LB, FA, FB, CA, CB, CR, TC (FTC is not available on BSE). Related: SE (no lock), BSED (double-rod rod lock). Sensors CMSE/DMSE fit magnetic BSE.
Where the Airtac BSE Clamp Standard Cylinder BSE32X800S Is Used
Vertical Lift Hold
Holds a 60 kg vertical lift stage securely mid-stroke with 600 N of fail-safe force, preventing gravity drops if the 0.7 MPa air supply is lost.
Pallet Stop Gate
Locks a 12 mm rod instantly during an E-stop on a packaging conveyor line, ensuring the stop gate stays firmly planted without drifting.
Tool Clamp Hold
Maintains a clamping fixture position on a light CNC router during an air pressure drop, keeping the workpiece secured until pressure is restored.
Is the Airtac BSE Clamp Standard Cylinder BSE32X800S the Right Cylinder?
Verify your suspended load requires 600 N or less of holding force. If you need more, step up to the 40 mm bore, which provides 628 N push at 0.5 MPa and 900 N of holding force. Stepping down is not an option as 32 mm is the smallest available.
The 800 mm stroke is non-standard and made-to-order; always use a guide rail to prevent side-load damage on the 12 mm rod. Remember the safety operating rule: engage the lock only after the rod fully stops, and release it only when piston pressures are balanced, allowing at least 0.5 s before moving. When replacing, match the 32 mm bore, 800 mm stroke, PT1/8 port, and -S magnet.
Quick checklist
- ✓ Load to hold ≤ 600 N?
- ✓ Fail-safe hold on air loss / E-stop needed
- ✓ Lock engaged only when stopped
- ✓ G1/8 release-air line available
- ✓ Magnet (-S) for CMSE/DMSE sensors?
Installation & Safety Notes
- check Engage the lock only after the rod has stopped — not as a dynamic brake.
- check Release only when both piston sides are pressure-balanced.
- check Allow ≥0.5 s for full release before commanding motion.
- check Feed the G1/8 release port with 0.15–0.7 MPa clean air.
- check Add safety-rated controls for man-rated / overhead loads.
- check Use SE mounting accessories (FTC excepted).
Airtac BSE Clamp Standard Cylinder BSE32X800S FAQ
The spring-applied collet engages automatically, providing a 600 N bidirectional static hold with no live air. It is a fail-safe lock, not a dynamic brake—engage it only after the rod stops.
At 0.5 MPa, the push force is 402 N and pull is 345 N. At the 0.7 MPa ceiling, push is 563 N, yielding a max drive of 57 kgf. The 600 N static holding force is separate from these drive numbers.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC BSE Cylinders
Request a Quote for Airtac BSE Clamp Standard Cylinder BSE32X800S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.