Airtac SE32 Standard Cylinder SE32X800
The AirTAC Airtac SE32 Standard Cylinder SE32X800 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 800mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke800 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X800
The AirTAC SE32X800 is a double-acting single-rod ISO 15552 profile cylinder engineered for compact pneumatics. It delivers a 402 N push force at 0.5 MPa and features a 12 mm hard-chrome rod with an M10x1.25 thread. Its extruded aluminum barrel omits external tie rods, yielding a smooth, corrosion-resistant body that mounts flush in tight machine envelopes.
This model includes field-adjustable air cushioning at both ends to decelerate the piston over a 27 mm cushion length, preventing hard end-stop impacts at high cycle rates. Note that this specific SKU lacks the built-in magnet option, meaning it is not wired for CMSE or DMSE position sensing without modification.
Airtac SE32 Standard Cylinder SE32X800 Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X800 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X800
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X800 Is Used
PCB Drill Spindle Loader
Handles the 402 N extend motion to position drill spindles over conveyorized PCB panels, utilizing the 800 mm stroke to reach across wide routing bays.
Carton Flap Folder
Provides the 345 N retract force needed to tuck corrugated carton flaps prior to sealing, with the 800 mm travel accommodating oversized box formats.
Lab Sample Dispenser
Moves fluid trays along an 800 mm axis within diagnostic equipment, where the smooth tie-rod-less barrel prevents particulate buildup in cleanroom environments.
Is the Airtac SE32 Standard Cylinder SE32X800 the Right Cylinder?
Generating 402 N of push force at 0.5 MPa, this 32 mm bore cylinder is suited for lighter-duty work. If your application requires less force, stepping down to a 25 mm bore yields a 246 N push, while moving up to a 40 mm bore provides 628 N of push for heavier payloads. Because the plain SE design lacks a rod lock, it cannot hold a load safely if air pressure drops; use a BSE variant for fail-safe braking.
At an 800 mm stroke, the unsupported 12 mm rod is highly susceptible to side-load bending and bearing wear. An external guide rail should be fitted to prevent premature seal failure. As a true ISO 15552 profile cylinder, it offers a drop-in dimensional replacement for other ISO 15552 cylinders, sharing standard mounting accessories and PT1/8 ports.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X800 FAQ
The SE32X800 generates 402 N push and 345 N pull at 0.5 MPa, 563 N push at 0.7 MPa, and a maximum of 82 kgf at 1.0 MPa. It operates at speeds between 30 and 800 mm/s.
Yes, the SE32X800 is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact mounting footprint, PT1/8 port size, and 12 mm rod thread for a drop-in retrofit.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X800
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.