Airtac SAID32 Double Rod Cylinder SAID32X25S
The AirTAC Airtac SAID32 Double Rod Cylinder SAID32X25S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 25mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke25 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID32 Double Rod Cylinder SAID32X25S
The AirTAC SAID32X25-S is a double-acting, double-rod ISO 15552 profile cylinder. A rod extends from both end covers, yielding equal annulus areas so extend and retract forces match exactly at 345 N each way at 0.5 MPa. The -S suffix indicates an integrated magnet compatible with CMSE reed and DMSE solid-state switches.
With a 12mm carbon steel rod and M10x1.25 thread, this 32mm bore unit uses G1/8 ports and adjustable air cushions at both ends. The through-rod design lets you mount a workpiece on the front and a cam or position flag on the rear, providing superior anti-rotation guidance compared to single-rod actuators.
Airtac SAID32 Double Rod Cylinder SAID32X25S Technical Specifications
| Model | Airtac SAID32 Double Rod Cylinder SAID32X25S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID32 Double Rod Cylinder SAID32X25S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID32 Double Rod Cylinder SAID32X25S Is Used
Symmetric Force Transfer
Push and pull loads with identical 345 N force at 0.5 MPa, ideal for mechanisms requiring perfectly balanced opposing motions without recalculating area differences.
Anti-Rotation Slides
The twin 12mm rods exiting both covers keep the load guided and prevent rotation during short 25mm clamping or positioning strokes better than a single rod.
Dual-Side Actuation
Mount the primary workpiece on the front rod and a secondary cam, flag, or second mechanism on the rear rod to drive two stations from one cylinder.
Is the Airtac SAID32 Double Rod Cylinder SAID32X25S the Right Cylinder?
Choose this 32mm twin-rod actuator when an application requires symmetric force and dual-side guidance rather than the higher单向 push force of a single-rod SAI. If you need less force, there is no smaller bore in the SAID range; if you need more, the 40mm bore provides 528 N both ways at 0.5 MPa. As a true ISO 15552 extruded profile cylinder, it is dimensionally interchangeable with other ISO 15552 double-rod cylinders.
Select the exact bore, 25mm stroke, G1/8 PT port, and -S magnet option for your replacement. Mounting options are limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, CR). Note that the air cushion only decelerates the piston near stroke end; it does not hold the load. If air pressure is lost, the cylinder drifts, so use an external rod lock or pilot-operated check valve for position holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID32 Double Rod Cylinder SAID32X25S FAQ
Because the double-rod design subtracts the rod area on both sides, the push and pull forces are equal. It generates 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa in both directions.
Yes, the SAID32X25-S is a profile cylinder with an ISO 15552 mounting interface, making it dimensionally interchangeable with other ISO 15552 double-rod cylinders. It uses G1/8 ports and a 12mm rod.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAID32 Double Rod Cylinder SAID32X25S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.