The AirTAC AirTAC SE100X450 ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 450mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X450 is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty linear motion. Operating at 0.5 MPa, it generates 3927 N of push force and 3681 N of pull force, scaling up to a maximum output of 801 kgf at 1.0 MPa. The extruded aluminum barrel design omits external tie rods entirely, yielding a compact, corrosion-resistant body that mounts flush against machine frames while maintaining the standardized ISO 15552 footprint.
This specific SKU is configured without a position-sensing magnet, relying on physical end-of-travel limits rather than electronic feedback. To absorb the kinetic energy of its 450 mm stroke at high speeds, the cylinder incorporates field-adjustable air cushioning at both ends. Technicians can tune these cushion needles to soften hard end stops, ensuring smooth deceleration without relying on fixed rubber bumpers that wear out over time.
| Model | AirTAC SE100X450 ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 450 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 5497 N push force at 0.7 MPa required to eject heavy plastic parts from injection molding platens, utilizing the 450 mm stroke to clear the mold base entirely.
Actuates a heavy-duty diverting arm on a packaging conveyor, using the 450 mm extension to push loaded pallets onto a secondary spur line without stalling under high side loads.
Indexes thick steel plates into a hydraulic press, where the 801 kgf maximum thrust capacity ensures positive positioning of heavy billets before the press cycles.
Selecting this 100 mm bore cylinder makes sense when your application requires substantial thrust, such as 3927 N push at 0.5 MPa. If your load demands less force, stepping down to the 80 mm bore provides 2513 N of push, which may improve cycle times and save air volume. Conversely, if you need maximum thrust, stepping up to the 125 mm bore yields 6136 N of push at 0.5 MPa. Because this unit lacks the -S magnet code, it cannot host AirTAC CMSE reed or DMSE electronic sensors; if your sequence requires positional feedback, you must select an SE model with the S option.
With a 450 mm stroke, the Ø25 mm piston rod experiences increased bending moments under side loads. Even with the robust M20x1.5 rod-end thread, an unsupported stroke of this length mandates an external guide rail to prevent premature rod-bearing wear. Furthermore, the adjustable air cushion decelerates the piston near the stroke ends but does not lock the load; if air pressure drops, the cylinder will drift, requiring a BSE rod lock variant for secure holding. This model features PT1/2 ports and is dimensionally interchangeable with other ISO 15552 cylinders for direct retrofits.
Quick checklist
The SE100X450 delivers a push force of 3927 N and a pull force of 3681 N at 0.5 MPa. At 0.7 MPa, the push force is 5497 N, with a maximum push capacity of 801 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE100X450 is dimensionally interchangeable per ISO 15552 standards. You can drop it in to replace other ISO 15552 profile cylinders using the same mounting accessories and PT1/2 port locations. Note that this specific SKU lacks a sensor magnet, so it will not work with CMSE or DMSE position switches without modifying the configuration.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.