The AirTAC AirTAC SE100X500 ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 500mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X500 is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty linear motion. It delivers a robust 3927 N push force at 0.5 MPa and utilizes a PT1/2 port paired with a 25 mm hard-chrome plated rod. Its square extruded aluminum barrel completely eliminates external tie rods, yielding a highly compact, corrosion-resistant body that mounts flush against machinery frames without protruding hardware.
This 100 mm bore unit features field-adjustable pneumatic cushioning at both ends, allowing technicians to fine-tune end-of-stroke deceleration via a set screw rather than relying on a fixed rubber bumper. Please note this specific SKU is built without a piston magnet, meaning it is not equipped for CMSE or DMSE electronic position sensing out of the box.
| Model | AirTAC SE100X500 ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
With 3927 N of push force at 0.5 MPa, this cylinder easily indexes heavy filled cartons onto palletizing conveyors over its 500 mm stroke.
The adjustable end cushions smoothly decelerate the 25 mm rod when stripping large molded plastic parts from heavy tooling at high cycle rates.
Provides rigid, repeatable positioning for sheet metal bending operations, where the tie-rod-free extruded profile allows flush mounting to the machine frame.
Delivering 3927 N of push force at 0.5 MPa, this 100 mm bore cylinder sits just below the 125 mm option (6136 N push) and well above the 80 mm model (2513 N push), giving you clear sizing flexibility for mid-to-heavy loads. If your application requires holding a load vertically or preventing drift when air pressure is lost or exhausted, this standard SE cylinder will not act as a lock; you should evaluate the AirTAC BSE series with an integrated rod lock or use an external pilot-operated check valve.
Because this unit spans a 500 mm stroke, the unsupported mass of the 25 mm rod introduces a risk of rod-bearing bending under high side loads. For optimal longevity and smooth operation, guide the load externally using linear rails rather than relying solely on the piston rod. As a true ISO 15552 profile cylinder, it serves as a drop-in dimensional replacement for other ISO 15552 cylinders, matching standard mounting hardware and port locations (PT1/2) exactly.
Quick checklist
The SE100X500 generates 3927 N of push force and 3681 N of pull force at 0.5 MPa. At 0.7 MPa, the push force increases to 5497 N. The maximum rated push force is 801 kgf (approx. 7854 N) at the maximum operating pressure of 1.0 MPa.
Yes, its standardized ISO 15552 / VDMA 24562 dimensions make it a drop-in replacement for other ISO 15552 profile cylinders using standard mounting accessories. This specific SKU does not include a built-in magnet, so it cannot be used with AirTAC CMSE or DMSE position sensors without modification.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.