The AirTAC AirTAC SE100X80 ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 80mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE100X80 is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics, delivering a robust 3927 N push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames without protruding hardware. This clean profile also features sensor grooves on three sides, though this specific SKU omits the -S magnet, meaning CMSE or DMSE position sensing is not supported out of the box.
To manage high kinetic energy during operation, the cylinder integrates field-adjustable air cushioning at both ends. Rather than a fixed rubber bumper, technicians can tune a needle screw to precisely decelerate the 25 mm rod near the stroke extremes, smoothing hard end stops at cycle speeds up to 800 mm/s. The unit operates on filtered 40 µm air within 0.15-1.0 MPa pressures, utilizing a PT1/2 port and an M20x1.5 rod-end thread.
| Model | AirTAC SE100X80 ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 5497 N push force at 0.7 MPa needed to firmly lock the upper slide of a hydraulic press into its top dead center position during die changes.
Drives a heavy divert arm on a high-speed packaging conveyor, utilizing the 36 mm adjustable cushion to soften the 80 mm stroke impact at 800 mm/s.
Actuates a heavy core pull mechanism inside an injection molding machine, relying on the no-tie-rod extruded barrel to fit within tight mold cavities.
Selecting the SE100X80 is appropriate when your load requires approximately 3927 N of push or 3681 N of pull at 0.5 MPa. If your application demands less force, stepping down to the 80 mm bore yields 2513 N of push, while moving up to the 125 mm bore provides 6136 N for heavier payloads. Because this is a standard double-acting cylinder, it will drift if air pressure is lost or the valve centers; applications requiring mid-stroke position holding should integrate an external pilot-operated check valve or evaluate the BSE rod-lock variant. For retrofitting, this model offers true ISO 15552 dimensional interchangeability, matching the 100 mm bore, 80 mm stroke, PT1/2 port, and standard mounting interface of competing profile cylinders.
Quick checklist
At 0.5 MPa, the SE100X80 generates 3927 N of push force and 3681 N of pull force. At 0.7 MPa, the push force increases to 5497 N. The maximum push force is 801 kgf at 1.0 MPa, and the operational speed range is 30-800 mm/s.
Yes, the SE100X80 is dimensionally interchangeable per ISO 15552 standards. You can drop it in as a replacement for other ISO 15552 profile cylinders, matching the 100 mm bore, 80 mm stroke, PT1/2 port, and standard mounting accessories without machining new holes.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.