The AirTAC AirTAC SE100X800 ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 800mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X800 is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics, delivering a substantial 3927 N push force at 0.5 MPa and up to 5497 N at 0.7 MPa. Its extruded aluminum barrel omits external tie rods entirely, yielding a smooth, compact body that resists corrosion and mounts flush against machine frames without protruding hardware.
This 100 mm bore unit features a Ø25 mm piston rod with an M20x1.5 thread, operating at speeds of 30-800 mm/s via a PT1/2 port. Field-adjustable air cushions at both ends allow technicians to tune end-of-stroke deceleration for heavy 800 mm traverses, while the square profile integrates sensor grooves on three sides for future position monitoring upgrades.
| Model | AirTAC SE100X800 ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 5497 N push force at 0.7 MPa required to drive heavy skids along an 800 mm stroke in automotive assembly lines, utilizing the adjustable cushion to soften hard stops at high cycle speeds.
Generates up to 801 kgf at 1.0 MPa to reliably eject large plastic components from injection molding machines, where the no-tie-rod profile prevents grease and debris buildup on the barrel.
Executes the 800 mm transfer stroke needed to push complete product layers onto outgoing pallets, leveraging the ISO 15552 mounting interface for seamless retrofitting into existing packaging machinery.
Selecting this 100 mm bore makes sense when 80 mm (2513 N push @0.5 MPa) is underpowered but stepping up to 125 mm (6136 N push @0.5 MPa) would waste energy and physical space. The 800 mm stroke pushes the limits of standard catalog lengths, meaning an unsupported rod of this diameter and extension is highly susceptible to bending under side loads; always pair this cylinder with an external linear guide to prevent premature rod-bearing wear.
Because this specific SKU lacks the -S magnet suffix, it cannot host AirTAC CMSE or DMSE electronic position sensors out of the box. If your sequence control requires end-of-stroke feedback, you must either add an external sensor track or select an SE100X800S variant. Furthermore, this standard double-acting cylinder will drift if air pressure is lost; applications requiring true fail-safe position holding must integrate an external rod lock or evaluate the BSE series.
Quick checklist
The SE100X800 provides a push force of 3927 N and a pull force of 3681 N at 0.5 MPa, a push force of 5497 N at 0.7 MPa, and a maximum push of 801 kgf at 1.0 MPa. It features a 100 mm bore, a Ø25 mm rod with an M20x1.5 thread, and a PT1/2 port.
Yes. The SE100X800 is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact mounting footprint and rod thread dimensions of other ISO 15552 profile cylinders, allowing for a direct drop-in replacement without machining new bracket holes.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.