This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement B06-SAID100X25S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X25S
The AirTAC Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X25S is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø100mm bore and 25mm stroke, G1/2 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the B06-SAID100X25S, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ100 mm
- Stroke25 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → B06-SAID100X25S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X25S
The AirTAC B06-SID100X25S is a double-acting, double-rod ISO 15552 cylinder where a rod exits both ends on one piston, making push and pull force equal at 3681 N @0.5 MPa. The B06- prefix marks this as a battery-manufacturing dedicated variant, mechanically identical to the base SID100X25S for cell and pack assembly. This SID model is discontinued; the direct replacement is the SAID100X25S, which adds an upgraded two-piece Y-shaped piston seal for lower start-up pressure and longer life.
It features a 100mm bore, G1/2 air port, M20x1.5 rod thread, and 36mm adjustable cushions. Because both faces use the rod-side area, the back rod can carry a sensor cam or drive two tools without anti-rotation issues. Note that a plain cylinder drifts on air loss; use an external rod lock or SAIL/BSAI variant for held loads.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X25S Technical Specifications
| Model | Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X25S |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | B06-SAID100X25S |
| Bore size | Ø100 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The B06-SAID100X25S carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
The B06-SAID100X25S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X25S
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X25S Is Used
Battery Cell Stacking
Applies equal both-ways force for precise cell stacking and alignment in module assembly, using the back rod to trigger a sensor cam.
Pack Transfer Unit
Drives a dual-tool transfer mechanism for battery pack handling, ensuring identical push and pull forces without requiring a larger bore.
Tab Welding Clamp
Clamps battery tabs for welding with a consistent 3681 N force at 0.5 MPa, while the double-rod design prevents rotation during the weld cycle.
Replacing the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X25S with the B06-SAID100X25S
To replace the discontinued B06-SID100X25S, specify the SAID100X25S, which matches the ISO 15552 mounting interface, G1/2 port, and 25mm stroke exactly. Size both directions by the equal-both-ways force: 3681 N at 0.5 MPa, or step down to an 80mm bore (2268 N) if lower force is needed. A double rod is right when you need equal push/pull or a back-rod sensor cam. Reuse FA, LB, or TC mounts; the -S magnet works with legacy CS1-B/DS1-B switches. For this 25mm stroke, side-load is minimal, but for strokes >=300mm ensure guide alignment to prevent binding.
Replacement checklist
- ✓ Same ISO 15552 interface → B06-SAID100X25S
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X25S FAQ
Yes, the SID line is discontinued. The direct replacement is the SAID100X25S. The B06- prefix simply marks it as a battery-manufacturing dedicated variant; mechanically it is identical to the SID100X25S, sharing the same ISO 15552 interface, bore, stroke, and G1/2 port.
Because it is a double-rod cylinder, force is equal both ways: 3681 N @0.5 MPa, 5153 N @0.7 MPa, and 6626 N @0.9 MPa. The air port is G1/2, the rod thread is M20x1.5, and speed is 30-800 mm/s. The air cushion only decelerates the piston; it does not hold the load on air loss.
Related AirTAC SAI Cylinders
Request a Quote for the B06-SAID100X25S
Send us the quantity and destination. We confirm price, stock and lead time on the B06-SAID100X25S replacement — usually within 7-8 hours.