verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID100X25S

The AirTAC B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID100X25S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 25mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ100 mm
  • Stroke25 mm
  • Port sizeG1/2
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$206.02 $223.61Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID100X25S

The AirTAC B06-SAID100X25S is a double-acting, double-rod ISO 15552 profile cylinder. The B06- prefix marks this as a battery-manufacturing dedicated variant of the SAID100X25-S, meaning it is mechanically identical to the standard model but curated for cell and pack assembly lines. Because the piston rod exits both end covers, the annulus area is symmetrical, yielding an equal extend and retract force of 3681 N at 0.5 MPa.

This through-rod geometry allows you to mount a primary workpiece on the front rod and a position flag or cam on the rear rod for external sensing. The extruded aluminum barrel features sensor grooves on both sides, and the included -S magnet enables precise tracking using AirTAC CMSE reed or DMSE electronic switches. It utilizes a G1/2 port and adjustable air cushions at both ends to manage impact.

Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID100X25S Technical Specifications

ModelAirtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID100X25S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ100 mm
Stroke25 mm
Acting typeDouble acting
Port sizeG1/2
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3682 N3682 N
0.7 MPa5154 N—
Max (@1.0 MPa)751 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID100X25S

SAIISO 15552 profile-barrel cylinder series.
100Bore size in mm.
×25Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID100X25S Is Used

factory

Battery Cell Stacking

Applies equal push and pull force to align and stack battery cells precisely without rotational drift during the compression phase.

sync_alt

Dual-Station Tabbing

Drives two synchronized welding or tabbing heads from a single cylinder, utilizing the twin rod ends for symmetric actuation.

straighten

Anti-Rotation Handling

Transfers delicate battery modules along a conveyor with high lateral stability, using the double-rod structure to prevent load twisting.

Is the Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID100X25S the Right Cylinder?

Select this 100 mm bore when a battery-handling mechanism requires high bidirectional force (up to 6626 N at 0.9 MPa) and strict anti-rotation guidance. If your assembly station needs less force, stepping down to an 80 mm bore provides 2268 N at 0.5 MPa. The twin-rod design is chosen over a single-rod SAI when you need to drive twin stations simultaneously or require rear-rod sensing. Note that this plain double-rod cylinder does not hold position upon air loss; for vertical battery stack holding without live pressure, use a BSAID clamp-lock or external pilot check valve.

As a dimensionally interchangeable ISO 15552 cylinder, it drops into existing footprints using Basic, FA, LB, TC, FTC, TCM1, or TCM2 mounts (omitting FB, CA, CB, CR). The 25 mm stroke keeps the assembly compact, but always ensure the rear rod has adequate clearance to protrude safely during operation.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID100X25S FAQ

Because it is a double-rod cylinder, the force is identical in both directions. It provides 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and 6626 N at 0.9 MPa for both extension and retraction.

The B06- prefix designates this as an AirTAC battery-manufacturing dedicated cylinder. It is mechanically identical to the standard SAID100X25-S, featuring the same ISO 15552 dimensions, G1/2 port, and double-rod configuration, but is specified for battery production applications.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID100X25S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for B06-SAID100X25S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.