This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement B06-SAID100X80, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X80
The AirTAC Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X80 is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø100mm bore and 80mm stroke, G1/2 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the B06-SAID100X80, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ100 mm
- Stroke80 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → B06-SAID100X80
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X80
The AirTAC B06-SID100X80 is a double-acting, double-rod ISO 15552 cylinder where the B06- prefix designates it as a battery-manufacturing dedicated variant, mechanically identical to the standard SID100X80. Because a rod exits both ends on a single piston, both faces use the rod-side area, making push and pull force equal at 3681 N @0.5 MPa, 5153 N @0.7 MPa, and 6626 N @0.9 MPa. The bore is 100 mm, the port is G1/2, and the rod-end thread is M20x1.5. This SID model is discontinued and replaced by the direct replacement SAID100X80.
The SAID replacement retains the exact ISO 15552 mounting interface, 36 mm adjustable cushions, and 30-800 mm/s speed. It upgrades the piston seal to two Y-shaped one-way elements for lower start-up pressure and longer life. This SKU has no -S magnet and cannot take a sensor. A plain cylinder drifts on air loss; cushions only decelerate, so use an external rod lock or SAIL/BSAI variant for held loads.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X80 Technical Specifications
| Model | Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X80 |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | B06-SAID100X80 |
| Bore size | Ø100 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The B06-SAID100X80 carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
The B06-SAID100X80 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X80
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X80 Is Used
Battery Cell Stacking
Applies equal both-ways force for precise, anti-rotation pressing and stacking of prismatic battery cells into modules.
Tab Welding Clamp
Drives two synchronized welding tools from a single piston to align and clamp battery tabs simultaneously.
Pack Handling Transfer
Uses the rear rod extension to actuate a cam on a return conveyor, indexing battery packs through the assembly line.
Replacing the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X80 with the B06-SAID100X80
To replace the discontinued B06-SID100X80, specify SAID100X80 for an direct match in bore, stroke, G1/2 port, and ISO 15552 mounting. Size both directions by equal force: if 5153 N @0.7 MPa is insufficient, step up to bore 125 (8028 N), or step down to bore 80 (3175 N). Choose a double-rod cylinder when you need anti-rotation stability or when the back rod must drive a second tool. Mounting options include Basic, FA, LB, and TC. For stroke lengths of 300 mm or longer, verify side-load limits to prevent guide wear. This non-magnetic SKU cannot use sensors.
Replacement checklist
- ✓ Same ISO 15552 interface → B06-SAID100X80
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X80 FAQ
Yes, the B06-SID100X80 (battery-manufacturing dedicated SID100X80) is discontinued. The direct replacement is the SAID100X80, which shares the same ISO 15552 interface, 100 mm bore, 80 mm stroke, G1/2 port, and equal both-ways force, but adds an upgraded Y-shaped piston seal.
Because it is a double-rod cylinder, force is equal both ways: 3681 N @0.5 MPa, 5153 N @0.7 MPa, and 6626 N @0.9 MPa. The air port is G1/2, the rod thread is M20x1.5, and speed is 30-800 mm/s.
Related AirTAC SAI Cylinders
Request a Quote for the B06-SAID100X80
Send us the quantity and destination. We confirm price, stock and lead time on the B06-SAID100X80 replacement — usually within 7-8 hours.