Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID100X80
The AirTAC B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID100X80 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 80mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke80 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID100X80
The AirTAC B06-SAID100X80 is a double-acting, double-rod ISO 15552 profile cylinder. The B06- prefix marks this as a battery-manufacturing dedicated variant, mechanically identical to the standard SAID100X80. Because a rod exits both ends, the annulus area is identical on extend and retract, yielding equal push and pull forces of 3681 N at 0.5 MPa.
This through-rod design allows you to mount a primary workpiece on the front rod and a secondary cam, position flag, or sensor target on the rear rod. The extruded aluminum barrel features sensor grooves on both sides, and the standard carbon steel rod handles high side loads with its 25 mm diameter and M20x1.5 thread.
Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID100X80 Technical Specifications
| Model | Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID100X80 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID100X80
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID100X80 Is Used
Battery Cell Stacking
Drives symmetric stacking mechanisms in prismatic cell assembly, using the equal both-way force to maintain precise, balanced pressure during electrode alignment.
Twin-Station Transfer
Actuates dual-side material transfer arms in module handling lines, utilizing the through-rod to drive two synchronized conveyors from a single piston.
Anti-Rotation Guiding
Pilots heavy battery packs through tab welding stations, relying on the twin-rod architecture to prevent rotational drift and maintain tool alignment.
Is the Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID100X80 the Right Cylinder?
Select this 100 mm bore when your battery assembly line requires symmetric actuation force and anti-rotation guidance that a single-rod SAI cannot provide. If your application needs less force, stepping down to the 80 mm bore gives 2268 N both ways at 0.5 MPa. Conversely, if you need higher throughput force, the 125 mm bore provides 5734 N.
This model features a PT tapered port thread (G1/2) and uses the reduced SAID mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). Note that the adjustable air cushions at both ends only decelerate the piston near stroke end; they do not hold the load. If position holding without live air pressure is required for cell stacking, use a BSAID clamp-lock cylinder or an external rod lock.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID100X80 FAQ
Because it is a double-rod cylinder, the push and pull forces are identical. It outputs 3681 N both ways at 0.5 MPa, 5153 N at 0.7 MPa, and 6626 N at 0.9 MPa.
The B06- prefix designates this as an AirTAC battery-manufacturing dedicated cylinder. It is mechanically identical to the standard SAID100X80 double-rod ISO 15552 cylinder, meaning all dimensions, ports, and forces remain unchanged.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID100X80
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.