This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement B06-SAID32X100S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X100S
The AirTAC Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X100S is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø32mm bore and 100mm stroke, G1/8 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the B06-SAID32X100S, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke100 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → B06-SAID32X100S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X100S
The AirTAC B06-SID32X100S is a discontinued double-rod ISO 15552 cylinder where the B06- prefix marks it as a battery-manufacturing dedicated variant of the base SID32X100S, mechanically identical to it. A rod exits both ends on one piston, meaning both faces use the rod-side area and push and pull force are equal. The direct replacement is the SAID32X100S, sharing the same G1/8 port, M10x1.25 thread, and ISO 15552 mounting interface. The SAI replacement uses an upgraded piston seal with two Y-shaped one-way elements for long life and low start-up pressure.
With a 32mm bore and 12mm rod, it delivers 345 N @0.5 MPa, 483 N @0.7 MPa, and 621 N @0.9 MPa equal both ways. The -S suffix indicates a built-in piston magnet for legacy CS1-B/DS1-B switches. A plain cylinder does not hold its load on air loss; the air cushion only decelerates near stroke end, so use an external rod lock or SAIL/BSAI variant for held loads.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X100S Technical Specifications
| Model | Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X100S |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | B06-SAID32X100S |
| Bore size | Ø32 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The B06-SAID32X100S carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The B06-SAID32X100S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X100S
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X100S Is Used
Battery Cell Stacking
Equal both ways force ensures precise, anti-rotation pressure when stacking battery cells in module assembly, preventing misalignment during the push and pull strokes.
Tab Handling Transfer
The rear extension rod drives a secondary mechanism or sensor cam on the conveyor line, synchronizing tab feeding and handling without adding a separate actuator.
Pack Alignment Press
Provides matched push and pull force for aligning battery pack components, ensuring consistent clamping pressure regardless of direction during the assembly process.
Replacing the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X100S with the B06-SAID32X100S
To replace the discontinued B06-SID32X100S, select the SAID32X100S, which is a direct upgrade keeping the 32mm bore, 100mm stroke, G1/8 port, and ISO 15552 mounting interface. Size both ways by verifying the equal force fits your application, or step up to a 40mm bore if more force is needed. A double rod is right when you need anti-rotation, a back rod to carry a sensor cam, or to drive two tools. Reuse FA, LB, or TC mounts. The -S magnet enables sensors. For this 100mm stroke, side-load is minimal, but for strokes >=300mm, ensure proper guide alignment to prevent binding.
Replacement checklist
- ✓ Same ISO 15552 interface → B06-SAID32X100S
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X100S FAQ
Yes, the B06-SID32X100S is discontinued. The direct replacement is the SAID32X100S. The B06- prefix simply marks it as the battery-manufacturing dedicated variant of the base SID32X100S, so all physical specs remain identical. The SAI replacement uses an upgraded piston seal and current AirTAC switches.
Force is equal both ways at 345 N @0.5 MPa, 483 N @0.7 MPa, and 621 N @0.9 MPa. The air port is G1/8. Speed is 30-800 mm/s.
Related AirTAC SAI Cylinders
Request a Quote for the B06-SAID32X100S
Send us the quantity and destination. We confirm price, stock and lead time on the B06-SAID32X100S replacement — usually within 7-8 hours.