Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X100S
The AirTAC B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 100mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke100 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X100S
The AirTAC B06-SAID32X100S is a double-acting, double-rod ISO 15552 profile cylinder. The B06- prefix designates it as a battery-manufacturing dedicated variant of the SAID32X100-S, sharing the exact same physical specs. Because a rod extends from both end covers, the annulus area is identical on both sides, yielding an equal extend and retract force of 483 N at 0.7 MPa.
This through-rod design allows you to mount a workpiece on the front rod and a position flag or cam on the rear. The extruded aluminum barrel features sensor grooves on both sides, and the included magnet (-S) supports AirTAC CMSE reed and DMSE electronic solid-state switches for precise positioning in cell assembly lines.
Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X100S Technical Specifications
| Model | Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X100S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X100S Is Used
Battery Cell Stacking
Drives precision stacking heads in prismatic cell assembly, using the equal both-way force to maintain consistent pressure during electrode placement and retraction.
Symmetric Transfer Unit
Powers twin-station transfer mechanisms where the rear rod simultaneously actuates a secondary diverter or position flag for synchronized module handling.
Anti-Rotation Guiding
Actuates linear slides in tab welding fixtures, leveraging the double-rod geometry to resist torsional loads and keep the welding head perfectly aligned.
Is the Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X100S the Right Cylinder?
Select this 32mm bore when a compact, symmetric force profile is required. It provides 345 N each way at 0.5 MPa; stepping up to a 40mm bore raises that to 528 N, while dropping to a smaller standard ISO bore reduces the footprint. Choose the double-rod SAID over a single-rod SAI when your battery handling fixture needs dual-side guidance, anti-rotation stability, or rear-rod sensing.
For direct compatibility, it matches ISO 15552 mounting interface dimensions and uses a PT G1/8 port. The available mounting set is Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). Note that the adjustable air cushions only decelerate the piston near stroke end; a plain SAID will drift if air pressure is lost, so use a SAIL lock cylinder or external rod lock if the battery cell payload must be held during an emergency stop.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X100S FAQ
Because it is a double-rod cylinder, the push and pull forces are equal. It generates 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa in both extend and retract directions.
The B06- prefix indicates this is an AirTAC battery-manufacturing dedicated variant of the standard SAID32X100-S. It is mechanically identical to the base model, retaining the same ISO 15552 dimensions, G1/8 port, and double-rod configuration, but is specified for battery production line applications.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.