This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement B06-SAID32X200, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X200
The AirTAC Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X200 is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø32mm bore and 200mm stroke, G1/8 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the B06-SAID32X200, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke200 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → B06-SAID32X200
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X200
The AirTAC B06-SID32X200 is a double-acting, double-rod ISO 15552 cylinder where the leading B06- prefix marks it as a battery-manufacturing dedicated variant, mechanically identical to the standard SID32X200. A rod exits both ends on one piston, meaning both faces use the rod-side area and push/pull force is equal both ways (345 N @0.5 MPa). It features a 32 mm bore, G1/8 port, M10x1.25 rod thread, and 27 mm adjustable air cushions at each end. This legacy SID model is discontinued and the direct replacement is the SAID32X200, which reuses the same ISO 15552 mounting interface, bore, stroke, and port.
The SAI replacement family introduces an upgraded piston seal using two Y-shaped one-way elements for low start-up pressure and long life, alongside SAIL (air-released lock) and BSAI (clamp-lock) variants the SI line lacked. Note this SKU lacks the -S magnet and cannot accept a magnetic switch. A plain cylinder does not hold loads on air loss; the cushion only decelerates near stroke end, so use an external rod lock or pilot-operated check valve for held loads.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X200 Technical Specifications
| Model | Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X200 |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | B06-SAID32X200 |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The B06-SAID32X200 carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The B06-SAID32X200 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X200
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X200 Is Used
Battery Cell Stacking
Applies equal both-ways force for precise, anti-rotation pressing and stacking of prismatic battery cells into modules without rotational drift.
Tab Welding Clamp
Drives two opposing tools simultaneously from one piston, ensuring balanced clamping pressure on battery tabs during ultrasonic welding.
Module Transfer
Uses the dual-rod symmetry to push and retract battery packs on assembly conveyors with stable, equal-force transitions in both directions.
Replacing the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X200 with the B06-SAID32X200
To replace the discontinued B06-SID32X200, select the direct replacement SAID32X200, which matches the 32 mm bore, 200 mm stroke, G1/8 port, and ISO 15552 mounting interface (Basic, FA, LB, TC, FTC, TCM1, TCM2). Because force is equal both ways at 345 N @0.5 MPa, size both directions identically; if more force is needed, step up to the 40 mm bore (528 N @0.5 MPa). Choose a double-rod configuration when you need anti-rotation stability or when the back rod must carry a sensor cam, though this specific non-magnetic SKU cannot host a switch. For strokes of 300 mm or longer, verify side-load limits to prevent guide wear. Since this cylinder lacks load-holding capability, specify an external rod lock or a SAIL/BSAI variant if battery-handling fixtures must resist gravity on air loss.
Replacement checklist
- ✓ Same ISO 15552 interface → B06-SAID32X200
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X200 FAQ
Yes, the B06-SID32X200 is discontinued. The direct replacement is the SAID32X200. The B06- prefix simply marks it as the battery-manufacturing dedicated variant of the base SID32X200. The SAID32X200 matches the 32 mm bore, 200 mm stroke, G1/8 port, and ISO 15552 mounting interface, while adding an upgraded piston seal.
Because it is a double-rod cylinder, force is equal both ways: 345 N @0.5 MPa, 483 N @0.7 MPa, and 621 N @0.9 MPa. The air port is G1/8, the rod thread is M10x1.25, and it has 27 mm adjustable cushions. It operates at 30-800 mm/s with a max standard stroke of 1000 mm.
Related AirTAC SAI Cylinders
Request a Quote for the B06-SAID32X200
Send us the quantity and destination. We confirm price, stock and lead time on the B06-SAID32X200 replacement — usually within 7-8 hours.