Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X200
The AirTAC B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X200 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 200mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke200 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X200
The AirTAC B06-SAID32X200 is a double-acting, double-rod ISO 15552 profile cylinder. The B06- prefix marks this as a battery-manufacturing dedicated variant, mechanically identical to the standard SAID32X200. Because a rod exits both ends, the annulus area is symmetrical, yielding exactly 345 N of force in both extend and retract directions at 0.5 MPa.
This twin-rod design is ideal for battery cell stacking and tabbing where dual-side guidance prevents rotational drift. The extruded aluminum barrel features sensor grooves on both sides, and the carbon steel rods use M10x1.25 threads. Adjustable air cushions at both ends (27 mm stroke) decelerate the piston smoothly.
Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X200 Technical Specifications
| Model | Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X200 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X200
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X200 Is Used
Battery Cell Stacking
Provides equal push and pull force for aligning and pressing battery cells during module assembly, using the twin rods to prevent rotational misalignment.
Dual-Station Transfer
Drives two synchronized pendants or tooling plates from a single piston, allowing simultaneous handling of battery tabs on both ends of the stroke.
Anti-Rotation Slides
Keeps battery handling grippers perfectly guided during horizontal transfer, using the through-rod geometry to resist torsional loads on the 200 mm stroke.
Is the Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X200 the Right Cylinder?
Choose this 32 mm bore when a compact, symmetric 345 N force is needed both ways, such as synchronizing two battery module handling stations. If your battery line needs less force, stepping down is not an option in this series, but stepping up to the 40 mm bore provides 528 N both ways. Unlike a single-rod SAI, this double-rod configuration allows mounting a position flag on the rear rod for exact tracking.
For this 200 mm stroke, the 12 mm carbon steel rod handles moderate side loads, but an external guide is recommended for heavy battery pack fixtures. This cylinder uses a PT tapered G1/8 port and supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts (omitting FB, CA, CB, CR). Note that standard air cushions only decelerate the piston; they do not hold the load if air pressure is lost. For position holding without live pressure, use an external rod lock or a BSAID clamp-lock cylinder. It is dimensionally interchangeable per ISO 15552.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X200 FAQ
Because it is a double-rod cylinder, the force is identical in both directions. It outputs 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa for both extend and retract strokes.
The B06- prefix indicates this is AirTAC's battery-manufacturing dedicated line. The B06-SAID32X200 is mechanically identical to the standard SAID32X200, featuring the same ISO 15552 dimensions, G1/8 port, and 200 mm stroke, but is designated for battery cell and pack assembly applications.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X200
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.