This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement B06-SAID32X25, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X25
The AirTAC Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X25 is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø32mm bore and 25mm stroke, G1/8 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the B06-SAID32X25, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke25 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → B06-SAID32X25
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X25
The AirTAC B06-SID32X25 is a double-acting, double-rod ISO 15552 cylinder where a rod exits both ends on a single piston, ensuring push and pull force are equal at 345 N (@0.5 MPa). The B06- prefix marks this as a battery-manufacturing dedicated variant, mechanically identical to the standard SID32X25. This discontinued model is fully replaced by the direct replacement SAID32X25, which reuses the same ISO 15552 mounting interface, G1/8 port, and M10x1.25 rod thread.
The SAI upgrade features a two Y-shaped one-way piston seal for low start-up pressure and long life. A double-rod design prevents rod rotation and can drive two tools simultaneously. This SKU lacks a magnet (-S) and cannot take sensors. Air cushions only decelerate; use an external rod lock for load holding.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X25 Technical Specifications
| Model | Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X25 |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | B06-SAID32X25 |
| Bore size | Ø32 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The B06-SAID32X25 carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The B06-SAID32X25 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X25
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X25 Is Used
Cell Stacking Alignment
Applies equal both-ways force to precisely align and press battery cells during module stacking, utilizing the anti-rotation benefit of the double-rod design.
Tab Handling Transfer
Drives dual-tool end effectors for picking and placing battery tabs on the assembly line, ensuring synchronized movement without rod twist.
Module Pack Insertion
Pushes battery modules into housings with consistent 345 N force at 0.5 MPa, retracting with identical force to maintain precise positioning.
Replacing the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X25 with the B06-SAID32X25
Replace the discontinued B06-SID32X25 directly with the SAID32X25, maintaining the exact 32mm bore, 25mm stroke, and G1/8 port. Because force is equal both ways, size both extension and retraction by checking the 345 N @0.5 MPa rating; if higher force is needed, step up to the 40mm bore (528 N). Choose a double-rod cylinder when anti-rotation or driving two tools is required. Mount using FA, LB, or TC brackets. As this SKU has no -S magnet, sensing is impossible. For strokes over 300mm, verify side-load limits to prevent guide wear.
Replacement checklist
- ✓ Same ISO 15552 interface → B06-SAID32X25
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X25 FAQ
Yes, the B06-SID32X25 battery-manufacturing dedicated cylinder is discontinued. The direct replacement is the SAID32X25, which shares the identical ISO 15552 interface, 32mm bore, 25mm stroke, and G1/8 port. The B06- prefix only designates the battery industry application and does not change physical specs.
Force is equal both ways due to the double-rod design: 345 N @0.5 MPa, 483 N @0.7 MPa, and 621 N @0.9 MPa. The air port is G1/8, the rod thread is M10x1.25, and it operates at 30-800 mm/s with a 27mm adjustable cushion at each end.
Related AirTAC SAI Cylinders
Request a Quote for the B06-SAID32X25
Send us the quantity and destination. We confirm price, stock and lead time on the B06-SAID32X25 replacement — usually within 7-8 hours.