This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement B06-SAID32X400, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X400
The AirTAC Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X400 is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø32mm bore and 400mm stroke, G1/8 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the B06-SAID32X400, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke400 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → B06-SAID32X400
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X400
The AirTAC B06-SID32X400 is a double-acting, double-rod ISO 15552 cylinder where a rod exits both ends, ensuring push and pull force are equal at 345 N @0.5 MPa, 483 N @0.7 MPa, and 621 N @0.9 MPa. The B06- prefix marks this as a battery-manufacturing dedicated variant, mechanically identical to the standard SID32X400 with a 32 mm bore, G1/8 port, and M10x1.25 rod thread. This legacy SID series is discontinued and is fully replaced by the direct replacement SAID32X400, which shares the exact ISO 15552 mounting interface, bore, stroke, and equal-both-ways force.
The double-rod design prevents piston rotation and allows the rear rod to carry a sensor cam or drive a second tool, while the upgraded SAI replacement features a two Y-shaped one-way piston seal for low start-up pressure and long life. Note this SKU lacks a -S magnet and cannot accept a sensor.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X400 Technical Specifications
| Model | Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X400 |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | B06-SAID32X400 |
| Bore size | Ø32 mm |
| Stroke | 400 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The B06-SAID32X400 carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The B06-SAID32X400 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X400
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×400 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X400 Is Used
Battery Cell Stacking
Equal both-ways force drives precision cell stacking and pressing mechanisms in module assembly, ensuring consistent pressure without rotational drift.
Tab Handling Transfer
The anti-rotation double-rod layout securely indexes battery tabs and separators on conveyor lines, with the rear rod available to mount a mechanical cam.
Pack Alignment Gates
Synchronized dual-end tooling pushes and pulls battery packs into alignment fixtures with identical 483 N @0.7 MPa force in both directions.
Replacing the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X400 with the B06-SAID32X400
To replace the discontinued B06-SID32X400, specify the direct replacement SAID32X400, keeping the 32 mm bore, 400 mm stroke, G1/8 port, and ISO 15552 mounting (Basic, FA, LB, TC). Size both directions by equal force: if 345 N @0.5 MPa is insufficient, step up to the 40 mm bore (528 N) or down to a smaller bore. Choose a double-rod cylinder when anti-rotation or synchronized dual-end tooling is required. Because this SKU lacks a -S magnet, it cannot use sensors. For the 400 mm stroke, use external guides to prevent rod bending and side-load damage. A plain cylinder does not hold loads on air loss; use an external rod lock or SAIL/BSAI variant for held loads.
Replacement checklist
- ✓ Same ISO 15552 interface → B06-SAID32X400
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID32X400 FAQ
Yes, the B06-SID32X400 is discontinued. The direct replacement is the SAID32X400. It shares the same ISO 15552 interface, 32 mm bore, 400 mm stroke, G1/8 port, and equal-both-ways force. The B06- prefix simply denotes the battery-manufacturing dedicated variant, and the SAI upgrade adds a two Y-shaped one-way piston seal for longer life.
Because it is a double-rod cylinder, force is equal both ways: 345 N @0.5 MPa, 483 N @0.7 MPa, and 621 N @0.9 MPa. The air port is G1/8, the rod thread is M10x1.25, and adjustable air cushions are 27 mm at each end.
Related AirTAC SAI Cylinders
Request a Quote for the B06-SAID32X400
Send us the quantity and destination. We confirm price, stock and lead time on the B06-SAID32X400 replacement — usually within 7-8 hours.