Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X400
The AirTAC B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X400 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 400mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke400 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X400
The AirTAC B06-SAID32X400 is a double-acting, double-rod ISO 15552 profile cylinder. The B06- prefix marks this as a battery-manufacturing dedicated variant of the SAID32X400, mechanically identical to the base model for cell and pack assembly lines. Because the piston rod exits both end covers, the annulus area is identical on both sides, yielding exactly 345 N of force in both extend and retract directions at 0.5 MPa.
This twin-rod layout allows you to mount a workpiece on the front rod and a position flag or cam on the rear rod to trigger CMSE or DMSE sensors in the dual side grooves. It uses a 12 mm carbon steel rod with an M10x1.25 thread, and shares the reduced SAID mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting the FB, CA, CB and CR styles found on single-rod units.
Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X400 Technical Specifications
| Model | Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X400 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 400 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X400
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×400 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X400 Is Used
Battery Cell Stacking
Drives precision stacking plates in prismatic cell assembly, using the twin-rod layout to maintain parallelism and prevent rotation during the electrode compression cycle.
Symmetric Transfer
Moves battery modules between conveyor stations with equal push and pull force, ensuring stable acceleration and deceleration without speed variations between directions.
Rear-Rod Tab Sensing
Actuates a tab-welding head on the front stroke while the rear rod protrudes to trigger an external DMSE solid-state sensor, confirming weld position without cluttering the primary work area.
Is the Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X400 the Right Cylinder?
Choose this 32 mm bore when a compact battery-handling mechanism requires symmetric force and anti-rotation guidance. It delivers 345 N both ways at 0.5 MPa; if your tabbing or stacking process needs less force, step down is not an option below 32 mm in this ISO 15552 range, but stepping up to the 40 mm bore yields 528 N both ways. Select this double-rod design over a single-rod SAI when you need to drive a second mechanism from the rear or require higher torsional stability.
For a 400 mm stroke, the 12 mm rod is unsupported inside the cylinder, making the assembly susceptible to side-load bending—always use an external linear guide for the payload. This cylinder uses PT tapered ports sized G1/8. Note that the adjustable air cushions at both ends only decelerate the piston near stroke end; they do not hold the load. If battery line safety requires position holding without live air pressure, use a BSAID clamp-lock cylinder or an external rod lock.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X400 FAQ
Because it is a double-rod cylinder, the effective piston area is the same on both sides. It provides exactly 345 N of force in both the extend and retract directions at 0.5 MPa, and 483 N both ways at 0.7 MPa.
The B06- prefix indicates this is an AirTAC battery-manufacturing dedicated variant of the standard SAID32X400. It is dimensionally interchangeable per ISO 15552 and mechanically identical to the base model, simply designated for battery industry applications.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X400
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.