AirTAC Pneumatics
AirTAC Guide Frames, Carriages & Guide Brackets
226 genuine AirTAC guide frames, guide units and carriages for guided cylinders, sizes 12-100 - sold without the cylinder, for replacement or building your own guided assembly.
inventory_2226 models availableSeries Overview
This collection holds 226 AirTAC guide frames, guide units, carriages and guide brackets for guided cylinders, in sizes 12, 16, 20, 25, 32, 40, 50, 63, 80 and 100. Every part here is the guiding half of a guided cylinder sold on its own, with no cylinder body, piston or seal kit inside. It serves two jobs: replacing a damaged guide assembly without replacing the cylinder, and building a guided assembly around a cylinder you already own.
Six part types make up the range. F-TSAI individual guide holders (120 parts) are the standalone TSAI guide frame. F-TMIC separate guide brackets (46 parts) belong to TMIC. F-TMICM guide unit complete sets (23) and F-TMICL linear guide carriage assemblies (23) are the guide halves of TMICM and TMICL. F-TMIM guide bracket assembly kits (7) and F-TMIL guide unit assemblies (7) round out the TMI family. The M and L suffix is the bearing type, carried across from the guided-cylinder catalogue: M is a bronze bushing sliding bearing that suits radial loads and offers greater torsional rigidity, while L is a linear bearing for lifting and pushing motion, high precision, high load capacity and low-friction travel.
Ordering follows the guided-cylinder code: F-TSAIM40X100, for example, is the size 40 TSAI guide frame with bronze bushing, ordered as an accessory. Codes that look similar are different products - F-TSAI32E, F-TSAI50E and F-TSAI80E are sensor mounting bases, listed under sensor mounting brackets. The AirTAC catalogue states no standard for these frames, so match by AirTAC series and size code rather than by ISO number.
Browse Models
Airtac F-TMIC Separate Guide Bracket F-TMICM25X75
SKU: F-TMICM25X75
$91.62$99.12
schedule Confirm lead time
Airtac F-TMIC Separate Guide Bracket F-TMICM25X25
SKU: F-TMICM25X25
$88.37$95.87
schedule Confirm lead time
Airtac F-TMIC Separate Guide Bracket F-TMICM25X50
SKU: F-TMICM25X50
$90.02$97.52
schedule Confirm lead time
Airtac F-TMIC Separate Guide Bracket F-TMICM25X250
SKU: F-TMICM25X250
$103.05$110.55
schedule Confirm lead time
Airtac F-TMIC Separate Guide Bracket F-TMICM25X200
SKU: F-TMICM25X200
$99.79$107.29
schedule Confirm lead time
Airtac F-TMIC Separate Guide Bracket F-TMICM25X150
SKU: F-TMICM25X150
$96.53$104.03
schedule Confirm lead time
Airtac F-TMIC Separate Guide Bracket F-TMICM25X125
SKU: F-TMICM25X125
$94.88$102.38
schedule Confirm lead time
Airtac F-TMIC Separate Guide Bracket F-TMICM20X50
SKU: F-TMICM20X50
$78.13$85.63
schedule Confirm lead time
Airtac F-TMIC Separate Guide Bracket F-TMICM20X75
SKU: F-TMICM20X75
$79.52$87.02
schedule Confirm lead time
Airtac F-TMIC Separate Guide Bracket F-TMICM25X100
SKU: F-TMICM25X100
$93.28$100.78
schedule Confirm lead time
Airtac F-TMIC Separate Guide Bracket F-TMICM20X25
SKU: F-TMICM20X25
$76.73$84.23
schedule Confirm lead time
Airtac F-TMIC Separate Guide Bracket F-TMICM20X150
SKU: F-TMICM20X150
$83.71$91.21
schedule Confirm lead time
Airtac F-TMIC Separate Guide Bracket F-TMICM20X250
SKU: F-TMICM20X250
$89.29$96.79
schedule Confirm lead time
Airtac F-TMIC Separate Guide Bracket F-TMICM20X200
SKU: F-TMICM20X200
$86.50$94.00
schedule Confirm lead time
Airtac F-TMIC Separate Guide Bracket F-TMICM20X100
SKU: F-TMICM20X100
$80.92$88.42
schedule Confirm lead time
Airtac F-TMIC Separate Guide Bracket F-TMICM20X125
SKU: F-TMICM20X125
$82.31$89.81
schedule Confirm lead time
Airtac F-TMIC Separate Guide Bracket F-TMICM16X50
SKU: F-TMICM16X50
$59.31$66.81
schedule Confirm lead time
Airtac F-TMIC Separate Guide Bracket F-TMICM16X200
SKU: F-TMICM16X200
$66.29$73.79
schedule Confirm lead time
Airtac F-TMIC Separate Guide Bracket F-TMICM16X25
SKU: F-TMICM16X25
$58.12$65.62
schedule Confirm lead time
Airtac F-TMIC Separate Guide Bracket F-TMICM16X150
SKU: F-TMICM16X150
$63.96$71.46
schedule Confirm lead time
Airtac F-TMIC Separate Guide Bracket F-TMICM16X75
SKU: F-TMICM16X75
$60.45$67.95
schedule Confirm lead time
Airtac F-TMIC Separate Guide Bracket F-TMICM16X125
SKU: F-TMICM16X125
$62.77$70.27
schedule Confirm lead time
Airtac F-TMIC Separate Guide Bracket F-TMICL25X75
SKU: F-TMICL25X75
$113.03$120.53
schedule Confirm lead time
Airtac F-TMIC Separate Guide Bracket F-TMICM16X100
SKU: F-TMICM16X100
$61.63$69.13
schedule Confirm lead time
Typical Applications
Stop-and-position stations on conveyor lines
A size 40 or 50 guide frame with M bronze bushing takes the radial knock when a guided assembly brakes or stops a passing part, and the greater torsional rigidity keeps the tool plate square against side loads.
Vertical lift-and-lower columns
L linear bearing carriages such as the F-TMICL linear guide carriage assembly suit lifting and pushing motion, giving low-friction travel and high precision on vertical strokes in lift fixtures and jigs.
Precision pick-and-place fixtures
High-precision assembly stations built around TSAIL or TMICL guided cylinders use the L linear bearing guide for smooth, accurate travel - and the guide half can be reordered on its own if it is damaged.
Rebuilding owned cylinders into guided assemblies
Shops holding standard cylinders can add the matching F-TSAI or F-TMIC guide in the same bore size instead of buying a complete new guided unit, keeping the existing cylinder in service.
How to Choose the Right Model
Pick the bearing type first. Choose M (bronze bushing) when the guide takes a radial load - braking and stopping actions are the catalogue's own example - and where torsional rigidity matters. Choose L (linear bearing) for lifting and pushing motion, or where high precision, high load capacity and low friction are the priority. Both bearing types are held across the size range for TSAI (60 each) and TMIC (46 each), so neither is a special-order choice. Then confirm the part type: a standalone F-TSAI holder, a complete F-TMICM guide unit set, or a linear F-TMICL carriage assembly.
Five-point match before ordering: (1) size, from 12 to 100, matching the bore in your cylinder code; (2) part type and bearing letter, M or L; (3) the guided-cylinder series the frame belongs to - TSAIM, TSAIL, TMICM or TMICL; (4) the full model code format, e.g. F-TSAIM40X100; (5) if you need position sensing, the sensor base is chosen by bore - 32E for 32 and 40, 50E for 50 and 63, 80E for 80 and 100. If you do not already own the cylinder, step out of this collection to the complete guided cylinders in the TSAIM, TSAIL, TMICM or TMICL series, where frame and cylinder arrive as one orderable unit. Brackets that fix the cylinder body are a separate mounting brackets collection.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and available mounting space
- ✓ Port / thread type (PT / NPT / G)
- ✓ Sensor / magnet option (-S)?
- ✓ Side load — consider a guided model
Frequently Asked Questions
226 parts in sizes 12, 16, 20, 25, 32, 40, 50, 63, 80 and 100. Prices run from $58.12 to $713.02 with a median of $186.07, so several guide frames cost more than a complete cylinder in another series - these are precision guiding assemblies, not cheap spares.
The letter is the bearing type, stated in the guided-cylinder catalogue. M is a bronze bushing sliding bearing for radial loads - braking and stopping actions are the catalogue's example - with greater torsional rigidity. L is a linear bearing for lifting and pushing motion, high precision, high load capacity and low-friction motion. Neither is an upgrade over the other; match the bearing to the load direction of your application.
Each frame matches the guided-cylinder series and size in its code - F-TSAIM40X100 is the size 40 TSAI guide with bronze bushing. Send us your cylinder model with your RFQ and we confirm the matching guide code before you order. Codes ending in E, such as F-TSAI32E, are sensor mounting bases sold in a separate collection, chosen by bore: 32E for 32 and 40, 50E for 50 and 63, 80E for 80 and 100.
The AirTAC catalogue states no standard for these guide frames, so specify them by AirTAC code rather than by ISO number or another manufacturer's model. All 226 parts are current accessory items, listed and orderable; lead time is confirmed on request with your RFQ, and every part ships as genuine AirTAC.
Authorized Export Seller
Genuine AirTAC parts produced by the AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote
Send us the model number, quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.