This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACED16X110, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPD Double Rod Compact Cylinder ACPD16X110
The AirTAC ACPD Double Rod Compact Cylinder ACPD16X110 is a double acting, double rod DIN-standard tight/compact air cylinder with a Ø16mm bore and 110mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACED16X110 (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ16 mm
- Stroke110 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod
- Rod threadM4×0.7
- StatusDiscontinued → ACED16X110
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACPD Double Rod Compact Cylinder ACPD16X110
A double acting compact cylinder with a through piston rod, the ACPD16X110 pushes and pulls with identical force because both strokes work on the rod-side area of its 16 mm bore: 75.4 N at 0.5 MPa and 105.6 N at 0.7 MPa in either direction. The 110 mm stroke is longer than the 75 mm standard limit for this bore, so it is a made-to-order build. The hard-anodized aluminium body keeps the mounting length roughly 50% shorter than an ISO 15552 profile cylinder, which is why this size fits slim pick-and-place arms and inspection gantries.
The 8 mm rod exits both covers, so the rear rod can carry a sensor flag or a second tool while the front rod does the work, and the through-rod resists rotation and side load better than a blind-end design. Fixed TPU bumpers sit at both ends. Note this model is discontinued: the current-production replacement is the ACED16X110 in the same bore, stroke and force class, so confirm ISO 21287 mounting dimensions before swapping.
Airtac ACPD Double Rod Compact Cylinder ACPD16X110 Technical Specifications
| Model | Airtac ACPD Double Rod Compact Cylinder ACPD16X110 |
|---|---|
| Series | ACPD DIN compact cylinder (discontinued) |
| Replacement | ACED16X110 |
| Bore size | Ø16 mm |
| Stroke | 110 mm |
| Acting type | Double acting, double rod |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 75 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACED16X110 (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 75 N |
| 0.7 MPa | 106 N |
| Max (@1.0 MPa) | 15 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACPD Double Rod Compact Cylinder ACPD16X110
| ACPD | DIN compact cylinder (double-rod, discontinued). |
|---|---|
| 16 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACPD Double Rod Compact Cylinder ACPD16X110 Is Used
Light fixture clamping
The symmetric 75.4 N push and pull at 0.5 MPa clamps small aluminium brackets in machining fixtures from either side of the jig.
Bidirectional part transfer
The through-rod drives a slider both ways with equal force, ideal for shuttling vials or connectors between two stations on a compact bench.
Sensor-flag indexing
The rear rod carries a flag for a switch position check on a 110 mm stroke indexing slide in electronics assembly, when the -S magnet option is ordered.
Replacing the Airtac ACPD Double Rod Compact Cylinder ACPD16X110 with the ACED16X110
At 75.4 N per side at 0.5 MPa this 16 mm bore suits light clamping and part transfer up to about 45 N of real work; step down to a 12 mm bore (42.4 N) for smaller loads or up to 20 mm (117.8 N) when the job grows. The 110 mm stroke is non-standard for this bore, so it ships as a made-to-order unit. FA/FB flange and LB foot mounts bolt to the ISO 21287 face, and the optional -S magnet enables CMSE / DMSE switches - this code has no magnet fitted. Since a plain double-rod cylinder drifts when air is lost, add a rod lock or pilot check for a held load. Order the ACED16X110 as the current direct and verify the mounting dimensions.
Replacement checklist
- ✓ Current-production ACE → ACED16X110
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPD Double Rod Compact Cylinder ACPD16X110 FAQ
Because a rod exits both covers, output is equal both ways: 75.4 N at 0.5 MPa and 105.6 N at 0.7 MPa per direction on the rod-side area of the 16 mm bore, with a maximum of 15.4 kgf at 1.0 MPa. Speed range is 30-500 mm/s and operating pressure is 0.15-1.0 MPa (22-145 psi).
The hard-anodized aluminium short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a fixed TPU bumper at each end and an M5x0.8 port. The ACPD16X110 is discontinued; the current-production ACED16X110 is the direct successor in the same bore, stroke and force class - confirm the ISO 21287 mounting dimensions before ordering.
Related AirTAC ACE Cylinders
Request a Quote for the ACED16X110
Send us the quantity and destination. We confirm price, stock and lead time on the ACED16X110 replacement — usually within 7-8 hours.