This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACED16X110S, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPD Double Rod Compact Cylinder ACPD16X110S
The AirTAC ACPD Double Rod Compact Cylinder ACPD16X110S is a double acting, double rod DIN-standard tight/compact air cylinder with a Ø16mm bore and 110mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACED16X110S (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ16 mm
- Stroke110 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod
- Rod threadM4×0.7
- StatusDiscontinued → ACED16X110S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACPD Double Rod Compact Cylinder ACPD16X110S
Double acting with a rod leaving both covers, the ACPD16X110S pushes and pulls with identical output: 75.4 N at 0.5 MPa and 105.6 N at 0.7 MPa in either direction, because both strokes work on the rod-side area. The through-rod resists rotation and light side load, gives a symmetric mount, and the rear rod can carry a sensor flag. A fixed TPU bumper sits at each end, and speed spans 30-500 mm/s at 0.15-1.0 MPa (22-145 psi).
The 16 mm bore sits in the ISO 21287 short-body class, saving roughly 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into slim fixtures and guarding. The 110 mm stroke is beyond the 75 mm standard for this bore, so it is made to order. Note this model is discontinued: the current direct is ACED16X110, same bore, stroke and force class - confirm ISO 21287 mounting dimensions before swapping.
Airtac ACPD Double Rod Compact Cylinder ACPD16X110S Technical Specifications
| Model | Airtac ACPD Double Rod Compact Cylinder ACPD16X110S |
|---|---|
| Series | ACPD DIN compact cylinder (discontinued) |
| Replacement | ACED16X110S |
| Bore size | Ø16 mm |
| Stroke | 110 mm |
| Acting type | Double acting, double rod |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 75 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACED16X110S (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 75 N |
| 0.7 MPa | 106 N |
| Max (@1.0 MPa) | 15 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACPD Double Rod Compact Cylinder ACPD16X110S
| ACPD | DIN compact cylinder (double-rod, discontinued). |
|---|---|
| 16 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACPD Double Rod Compact Cylinder ACPD16X110S Is Used
Reciprocating small parts transfer
The through-rod drives a light pusher from either cover on an electronics assembly line, with 75.4 N both ways and the rear rod carrying a CMSE switch flag for stroke-end detection.
Symmetric press or eject station
A lab fixture ejects finished vials with equal force in both directions, using the 105.6 N at 0.7 MPa rating and the M4x0.7 female rod thread to pick a knuckle.
Position-monitored gate actuator
A packaging machine's divert gate swings on the 110 mm made-to-order stroke, with DMSE solid-state switches reporting both end positions through the fitted -S magnet.
Replacing the Airtac ACPD Double Rod Compact Cylinder ACPD16X110S with the ACED16X110S
At 75.4 N per side, this 16 mm unit suits light clamping and transfer; step down to the 12 mm bore (42.4 N) for tighter loads or up to 20 mm (117.8 N) when more force is needed. The 110 mm stroke is non-standard for bore 16 (75 mm max standard), so order it as a made-to-order build. This S-coded version carries the optional -S magnet, so CMSE / DMSE switches can be fitted for position feedback. A plain double-rod cylinder drifts when air is lost - add a rod lock or pilot check if the load must stay put. For new projects, specify the ACED16X110, the current ISO 21287 successor.
Replacement checklist
- ✓ Current-production ACE → ACED16X110S
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPD Double Rod Compact Cylinder ACPD16X110S FAQ
Output is equal in both directions because a rod exits each cover: 75.4 N at 0.5 MPa, 105.6 N at 0.7 MPa, and up to 15.4 kgf at 1.0 MPa on the rod-side area. Speed range is 30-500 mm/s over 0.15-1.0 MPa (22-145 psi), with 1.5 MPa (215 psi) proof pressure. The 110 mm stroke exceeds the 75 mm standard for bore 16, so it is built to order.
No - the ACPD family is discontinued. The current-production replacement is ACED16X110 (swap the P for an E), an ISO 21287 compact double-rod cylinder in the same bore, stroke and force class. Confirm the ISO 21287 mounting dimensions before swapping, since the ACP was built to the DIN standard. This S version already carries the optional -S magnet for CMSE / DMSE switches.
Related AirTAC ACE Cylinders
Request a Quote for the ACED16X110S
Send us the quantity and destination. We confirm price, stock and lead time on the ACED16X110S replacement — usually within 7-8 hours.