This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACED16X110SB, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPD Double Rod Compact Cylinder ACPD16X110SB
The AirTAC ACPD Double Rod Compact Cylinder ACPD16X110SB is a double acting, double rod DIN-standard tight/compact air cylinder with a Ø16mm bore and 110mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACED16X110SB (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ16 mm
- Stroke110 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod
- Rod threadM4×0.7
- StatusDiscontinued → ACED16X110SB
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACPD Double Rod Compact Cylinder ACPD16X110SB
The ACPD16X110SB is a double acting, double-rod compact cylinder from AirTAC's DIN-standard ACP family: a rod exits both covers, so the 16 mm bore delivers the same 75.4 N at 0.5 MPa (105.6 N at 0.7 MPa) on every stroke because both sides work on the rod-side area. The through-rod resists rotation and light side load, gives a symmetric mount, and the rear rod can carry a sensor flag, while fixed TPU bumpers pad both ends. This model carries the optional -S magnet, so CMSE or DMSE reed and solid-state switches can be fitted for end-of-stroke sensing.
The short ISO 21287-class body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it suits slim fixtures, sliding guards and compact pick stations. Note the 110 mm stroke is above the 75 mm maximum standard stroke for bore 16, so it is made to order. This model is discontinued; the current-production direct is the ACED16X110, and buyers should confirm ISO 21287 mounting dimensions before swapping.
Airtac ACPD Double Rod Compact Cylinder ACPD16X110SB Technical Specifications
| Model | Airtac ACPD Double Rod Compact Cylinder ACPD16X110SB |
|---|---|
| Series | ACPD DIN compact cylinder (discontinued) |
| Replacement | ACED16X110SB |
| Bore size | Ø16 mm |
| Stroke | 110 mm |
| Acting type | Double acting, double rod |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 75 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACED16X110SB (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 75 N |
| 0.7 MPa | 106 N |
| Max (@1.0 MPa) | 15 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACPD Double Rod Compact Cylinder ACPD16X110SB
| ACPD | DIN compact cylinder (double-rod, discontinued). |
|---|---|
| 16 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACPD Double Rod Compact Cylinder ACPD16X110SB Is Used
Bidirectional slide transfer
A through-rod on a small linear slide pushes and pulls with equal 75.4 N force, so a PCB carrier tray shuttles between two stations on one cylinder at 30-500 mm/s.
Flag-driven position feedback
The rear rod carries a switch flag, and with the -S magnet a CMSE or DMSE switch confirms mid-stroke position on an automated test fixture for connectors.
Compact gate clamp
At 105.6 N both ways at 0.7 MPa, the 16 mm bore clamps a sliding inspection guard in a machine tool enclosure where a full-length profile cylinder will not fit.
Replacing the Airtac ACPD Double Rod Compact Cylinder ACPD16X110SB with the ACED16X110SB
Size by force: if 75.4 N at 0.5 MPa is marginal, step up to bore 20 (117.8 N); if it is generous, bore 12 gives 42.4 N in the same compact family. Remember a plain double-rod cylinder drifts when air is lost - add a rod lock or pilot check if the load must be held. The 110 mm stroke is non-standard for bore 16 (max standard 75 mm) and is built to order. FA/FB flange and LB foot mountings suit this through-rod format, and the -S magnet on this model pairs with CMSE / DMSE switches. For new projects, order the ACED16X110 instead - same bore, stroke and force class.
Replacement checklist
- ✓ Current-production ACE → ACED16X110SB
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPD Double Rod Compact Cylinder ACPD16X110SB FAQ
Because a rod exits both covers, force is equal in both directions: 75.4 N at 0.5 MPa and 105.6 N at 0.7 MPa, with a maximum of 15.4 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the port is M5x0.8. The 110 mm stroke exceeds the 75 mm standard maximum for bore 16, so it is made to order.
The ACPD family is no longer in production. The current direct is the ACED16X110 (swap the P for an E), an ISO 21287 compact cylinder in the same bore, stroke and force class with a matching short body and mounting family. Confirm the ISO 21287 mounting dimensions against your fixture before swapping, since the ACP was built to a DIN-standard footprint.
Related AirTAC ACE Cylinders
Request a Quote for the ACED16X110SB
Send us the quantity and destination. We confirm price, stock and lead time on the ACED16X110SB replacement — usually within 7-8 hours.