This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACED16X200, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPD Double Rod Compact Cylinder ACPD16X200
The AirTAC ACPD Double Rod Compact Cylinder ACPD16X200 is a double acting, double rod DIN-standard tight/compact air cylinder with a Ø16mm bore and 200mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACED16X200 (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ16 mm
- Stroke200 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod
- Rod threadM4×0.7
- StatusDiscontinued → ACED16X200
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACPD Double Rod Compact Cylinder ACPD16X200
A double acting compact cylinder with a rod leaving both covers, the ACPD16X200 pushes and pulls with the same 75.4 N at 0.5 MPa (105.6 N at 0.7 MPa) because both strokes work on the rod-side area. The 16 mm bore drives an 8 mm hard-chrome S45C rod through a hard-anodized aluminium body, and the 200 mm stroke is a made-to-order length, since the standard catalogue stops at 75 mm for this bore.
The through-rod resists rotation and side load and gives a symmetric mount, so the rear rod can carry a sensor flag while the front rod does the work. A fixed TPU bumper sits at each end. This model is discontinued; the current direct is the ACED16X200 in the same bore, stroke and force class - confirm the ISO 21287 mounting dimensions before swapping.
Airtac ACPD Double Rod Compact Cylinder ACPD16X200 Technical Specifications
| Model | Airtac ACPD Double Rod Compact Cylinder ACPD16X200 |
|---|---|
| Series | ACPD DIN compact cylinder (discontinued) |
| Replacement | ACED16X200 |
| Bore size | Ø16 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 75 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACED16X200 (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 75 N |
| 0.7 MPa | 106 N |
| Max (@1.0 MPa) | 15 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACPD Double Rod Compact Cylinder ACPD16X200
| ACPD | DIN compact cylinder (double-rod, discontinued). |
|---|---|
| 16 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACPD Double Rod Compact Cylinder ACPD16X200 Is Used
Reciprocating test slides
The equal 75.4 N push and pull at 0.5 MPa suits a lab fixture that must stroke a 200 mm path with identical force in both directions, with the rear rod carrying a position flag.
Mirror-sensor gate
With the -S magnet option and CMSE / DMSE switches on both rods, a packaging line gets end-of-travel signals from a single 16 mm bore cylinder driving a lightweight gate.
Replacing the Airtac ACPD Double Rod Compact Cylinder ACPD16X200 with the ACED16X200
At 75.4 N per side, this bore sits between the 12 mm (42.4 N) and 20 mm (117.8 N) versions, so step up if your jig needs more margin. The 200 mm stroke is non-standard and built to order. Note that a plain double-rod cylinder drifts when air is lost - add a rod lock or pilot check if the load must stay put. Mounting brackets and the optional -S magnet for CMSE / DMSE switches are ordered with the cylinder; without -S there is no magnet. Order the ACED16X200 for current production.
Replacement checklist
- ✓ Current-production ACE → ACED16X200
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPD Double Rod Compact Cylinder ACPD16X200 FAQ
Because a rod exits both covers, output is equal both ways: 75.4 N at 0.5 MPa and 105.6 N at 0.7 MPa on the rod-side area, with a peak of 15.4 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s, air filtered to 40 um, temperature -20 to +70 C.
No, it is simply a made-to-order stroke; the standard maximum for a 16 mm bore is 75 mm. Also note this model is discontinued: the current-production ACED16X200 matches the bore, stroke and force class, but verify the ISO 21287 mounting dimensions before you swap, since the ACP was built to a DIN-standard footprint.
Related AirTAC ACE Cylinders
Request a Quote for the ACED16X200
Send us the quantity and destination. We confirm price, stock and lead time on the ACED16X200 replacement — usually within 7-8 hours.