This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACED16X200S, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPD Double Rod Compact Cylinder ACPD16X200S
The AirTAC ACPD Double Rod Compact Cylinder ACPD16X200S is a double acting, double rod DIN-standard tight/compact air cylinder with a Ø16mm bore and 200mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACED16X200S (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ16 mm
- Stroke200 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod
- Rod threadM4×0.7
- StatusDiscontinued → ACED16X200S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACPD Double Rod Compact Cylinder ACPD16X200S
A double acting compact cylinder with a rod through both covers, the ACPD16X200S pushes and pulls with identical force because each stroke works on the rod-side area: 75.4 N at 0.5 MPa and 105.6 N at 0.7 MPa in either direction. The 16 mm bore carries an 8 mm rod with a female M4x0.7 thread and an M5x0.8 air port. The 200 mm stroke is longer than the 75 mm standard for this bore, so it is a made-to-order build. This model is discontinued; the current-production successor is the ISO 21287 ACED16X200 in the same bore, stroke and force class.
The short ISO 21287-class body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, which is why it suits slim slides and tight guards. The through-rod resists rotation and side load and gives a symmetric mount, and the rear rod can carry a sensor flag. Because the S code is ordered, the magnet is fitted, so CMSE or DMSE reed or solid-state switches can be clipped on for end-of-stroke signalling. A fixed TPU bumper sits at each end, and speed runs 30-500 mm/s at 0.15-1.0 MPa (22-145 psi).
Airtac ACPD Double Rod Compact Cylinder ACPD16X200S Technical Specifications
| Model | Airtac ACPD Double Rod Compact Cylinder ACPD16X200S |
|---|---|
| Series | ACPD DIN compact cylinder (discontinued) |
| Replacement | ACED16X200S |
| Bore size | Ø16 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 75 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACED16X200S (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 75 N |
| 0.7 MPa | 106 N |
| Max (@1.0 MPa) | 15 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACPD Double Rod Compact Cylinder ACPD16X200S
| ACPD | DIN compact cylinder (double-rod, discontinued). |
|---|---|
| 16 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACPD Double Rod Compact Cylinder ACPD16X200S Is Used
Signalled gate on a packaging line
The fitted -S magnet accepts CMSE or DMSE switches, so a 200 mm gate stroke on a carton diverter reports both end positions to the PLC without external flags.
Symmetric press between rollers
Equal 75.4 N force in both directions lets one through-rod cylinder pinch or transfer a small part on a lab fixture, with the rear rod carrying a position flag.
Replacing the Airtac ACPD Double Rod Compact Cylinder ACPD16X200S with the ACED16X200S
Size this bore when the job needs about 75 N at 0.5 MPa; step down to the 12 mm bore (42.4 N) for lighter gates or up to the 20 mm bore (117.8 N) when the load grows. The through-rod format suits parts that must be guided or clamped from both sides. Remember the piston will drift if air is lost, so add a rod lock or pilot check for a held load. LB foot or FA/FB flange mounting bolts to the standard face. For new designs, order the ACED16X200 instead and confirm the ISO 21287 mounting dimensions before swapping.
Replacement checklist
- ✓ Current-production ACE → ACED16X200S
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPD Double Rod Compact Cylinder ACPD16X200S FAQ
Output is equal both ways because the double rod exposes the rod-side area on every stroke: 75.4 N at 0.5 MPa and 105.6 N at 0.7 MPa, with a maximum of 15.4 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C on air filtered to 40 um.
The standard stroke limit for a 16 mm bore is 75 mm, so 200 mm is a made-to-order, non-standard build with a longer lead time. The ACPD family is discontinued; the direct successor is the ISO 21287 ACED16X200, which matches the bore, stroke and force class. Confirm the ISO 21287 mounting dimensions before swapping, since the ACP follows the older DIN-standard footprint.
Related AirTAC ACE Cylinders
Request a Quote for the ACED16X200S
Send us the quantity and destination. We confirm price, stock and lead time on the ACED16X200S replacement — usually within 7-8 hours.